Skip to content

About

Python/scikit-rf tool for model-assisted VNA time-domain gating using physical geometry, propagation delay, and S-parameter data to guide DUT boundary and gate placement.

Topics

Resources

Stars

0 stars

Watchers

0 watching

Forks

Latest commit

 

History

9 Commits

Folders and files

NameName
Last commit message
Last commit date
 
 
 
 
 
 
 
 

Repository files navigation

Model-Assisted Time-Gate Placement for VNA Measurements

I am developing a method for selecting time-domain gates for VNA S-parameter measurements when test adapters cannot be calibrated out of the measurement system.

Current Status

A working application has been developed in Python using scikit-rf. The current version can load and inspect Touchstone S-parameter data, display frequency- and time-domain responses, and perform time-domain gating using user-selected parameters.

The present development work is focused on moving beyond manual gate placement. The next stage is to calculate expected electrical delays from known physical dimensions and propagation velocity, compare those predictions with measured delay and reflection data, and use that information to identify the probable DUT boundaries in the time-domain response.

The application therefore already provides the basic measurement, transformation, visualization, and gating framework. The model-assisted gate-placement logic described below is the next layer being added to that framework.

The current Python prototype loads Touchstone data, performs time-domain processing, and provides the framework for overlaying predicted DUT and adapter regions and suggesting gate locations.

Current program prototype

Project Idea

The basic idea is to use known physical information about the test setup—such as cable length, adapter length, connector location, and nominal velocity factor—to predict where the DUT should appear in the time-domain response. Those predictions can then be checked against measured electrical delay and the transformed (S_{11}) and (S_{22}) responses. The acquisition bandwidth is also used to estimate the achievable time-domain resolution and point-spread width, establishing how precisely nearby discontinuities can actually be distinguished.

The goal is not simply to identify a reflection peak and place a gate next to it. Because a finite measurement bandwidth spreads the response of a discontinuity over a finite region in time, a poorly placed gate may suppress part of the actual DUT response along with the unwanted adapter response. By combining expected physical geometry, measured electrical behavior, and the known resolution limits of the acquisition, the method is intended to provide a more systematic basis for choosing gate boundaries.

The first implementation is being developed in Python using scikit-rf. It will read Touchstone data, calculate relevant acquisition and time-domain parameters, estimate expected DUT and adapter locations, compare those predictions with measured electrical delay and bidirectional reflection data, and provide suggested gate locations for review.

This initial work is intended as a model-assisted gate-placement method rather than a fully automatic optimization system. Future work could use measured feature detection, cross-correlation between predicted and observed responses, refinement of propagation-delay estimates, uncertainty analysis, and numerical optimization to determine gate placement more directly from the measurement data.

Selected Background Sources

  1. Keysight Technologies, “Time Domain Analysis Using a Network Analyzer.”
    Application material covering transformation of frequency-domain VNA measurements into the time domain, interpretation of discontinuities versus delay/distance, and time-domain gating.

  2. Rohde & Schwarz, “Time Domain Analysis with VNA.”
    Overview of VNA time-domain and distance-to-fault measurements, including time gating and the effects of finite frequency sweep range and windowing on impulse width and sidelobes.

  3. scikit-rf Documentation, “Time Domain and Gating” and skrf.time.time_gate.
    Documentation for the Python tools used to perform time-domain transformation and gating, including explicit gate boundaries, window functions, and FFT-based transformation between the frequency and time domains.

About

Python/scikit-rf tool for model-assisted VNA time-domain gating using physical geometry, propagation delay, and S-parameter data to guide DUT boundary and gate placement.

Topics

Resources

Stars

0 stars

Watchers

0 watching

Forks

Releases

Packages

Contributors

Languages