Skip to content

Update shelly_1 #2001

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Open
ALfuhrmann wants to merge 1 commit into
base: master
Choose a base branch
from
Open

Update shelly_1 #2001

Changes from all commits
Commits
Show all changes
1 commit
Select commit
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
2 changes: 1 addition & 1 deletion _templates/shelly_1
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -32,7 +32,7 @@ An ESP8266 with 2MB flash single relay device 42mm "round" in size.
## Serial Connection
Shelly1 comes with a partially exposed programming/debug header which can be used to flash Tasmota on the device. A serial-to-USB adapter is needed as well as a reliable 3.3V source with at least 350 mA drive capability. The following diagram shows the device pinout.

<img src="https://kb.shelly.cloud/__attachments/237502485/Gen1-addon-interface.png" height="250" />
<img src="https://kb.shelly.cloud/__attachments/a_03939be2dbf2781863a0ee69b2ba568b6917110739688c909c0f2d7697fd7486/Gen1-addon-interface.png" height="250" />

## Flash mode
To be able to flash the Tasmota firmware you need to get into flash mode. Therefore connect a wire from GPIO0 to ground. For further information have a look at [Hardware Preparation](https://tasmota.github.io/docs/Getting-Started/#hardware-preparation#bringing-the-module-in-flash-mode).
Expand Down