Skip to content

About

Open Source bumping car robot project based on ESP32

Resources

Stars

1 star

Watchers

1 watching

Forks

Latest commit

 

History

62 Commits

Folders and files

NameName
Last commit message
Last commit date
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Bumping Cars

Disclaimer

The information displayed here is provided as is, you are using it at your own risk. Under no circumstances shall the author be liable for any kind of damages resulting from the use, misuse or inability to use of this code and information even though if the author had previously adivied of the possibility of such damages.

Summary

The main purpose of this project is to develop a bumping car robot for the I Jornadas del Club de Robótica y Mecatrónica and other events in which these robots may be used as a fun activity for the attendees.

These robots are based on ESP32 and use bumpers to manage the bumping mechanic of the game, as well as an array of 3 leds to manage their health counters. The Bluepad32 library has been used communicate both the robot and the gamepad.

Components

  • WeMos D1 ESP32 WROOM WiFi (It doesn't have to be this exact board; any ESP32 board with the required pins and Bluepad32 support will work)
  • L298n Motor Driver
  • DC Gear Motor with Tire Wheels. Gear rate 1:48. 240 rpm. (I don't recommend going with wheels much faster than those, unless you want to have GTA 7 before 6 is released!)
  • 2 bumpers
  • 9V battery holder + battery (Connected to board)
  • 4 AA battery holder + 4 AA batteries (Connected to motor driver)
  • Caster Wheel
  • Methacrylate chassis (The one you get from most motor kits)

Other:

  • Various wires
  • Soldering tin
  • Glue sticks
  • Gamepad (Check out The Bluepad32's supported gamepad list for more info on this, although some knockoff versions of famous controllers worked out fine for me as well as OG versions)

A repurposed 3D parallelepiped was used as a fender for the the bumping cars, enabling the participants to use it to activate the bumpers in their opponent's robot.

Circuit

Components in the Robot

LED Array

Algorithm

A very straightforward algorithm was implemented. Each time a bumper is activated, a led in the array will shut down. Once all leds are shut off, the robot will stop moving (aka. it dies).

Instructions of use

Connect the batteries to the robot and place it on the floor. Afterwards, pair the controller to the robot as per your controller's instructions.

About

Open Source bumping car robot project based on ESP32

Resources

Stars

1 star

Watchers

1 watching

Forks

Releases

Packages

Contributors

Languages