Yocto Build for Nuvoton Boards

Supported Boards:

• MA35D1 (numaker-som-ma35d16a81)
• MA35H0 (numaker-hmi-ma35h04f70)
• MA35D0 (numaker-iot-ma35d03f80)

NOTE: There are multiple board models available for reference. For example, in the case of MA35D1, you can refer to source/meta-ma35d1/conf/machine/* for configurations.

Downloading Source and Building Process:

1. For MA35D1 (numaker-som-ma35d16a81):

1.1. Initialize Yocto repository:

repo init -u https://github.com/OpenNuvoton/MA35D1_yocto-v5.0.git -m meta-ma35d1/base/ma35d1.xml

repo sync

1.2. Set up the environment and build:

DISTRO=nvt-ma35d1-directfb MACHINE=numaker-som-ma35d16a81 source sources/init-build-env build

NOTE: Modify the device tree of arm-trusted-firmware and the kernel as per the board in source/meta-ma35d1/conf/machine/*.conf.

1.3. Execute bitbake to build core-image-minimal:

bitbake core-image-minimal

2. For MA35H0 (numaker-hmi-ma35h04f70):

2.1. Initialize Yocto repository:

repo init -u https://github.com/OpenNuvoton/MA35D1_yocto-v5.0.git -m meta-ma35h0/base/ma35h0.xml

repo sync

2.2. Set up the environment and build:

DISTRO=nvt-ma35h0-directfb MACHINE=numaker-hmi-ma35h04f70 source sources/init-build-env build

NOTE: Same modification note as in section 1.2.

2.3. Execute bitbake to build core-image-minimal:

bitbake core-image-minimal

3. For MA35D0 (numaker-iot-ma35d03f80):

3.1. Initialize Yocto repository:

repo init -u https://github.com/OpenNuvoton/MA35D1_yocto-v5.0.git -m meta-ma35d0/base/ma35d0.xml

repo sync

3.2. Set up the environment and build:

DISTRO=nvt-ma35d0 MACHINE=numaker-som-ma35d16a81 source sources/init-build-env build

NOTE: Same modification note as in section 1.2.

3.3. Execute bitbake to build core-image-minimal:

bitbake core-image-minimal