Web UI with Goke 7205v200

[sergshadrap]

Tried WebUI with XM GK7205V200 - after selecting chipset , refused downloading firmware, downloaded manually and selected over file menu. First attempt stopped at 44% , log :
10:36:36 Waiting for bootrom... power-cycle the device now!
10:36:39 Boot mode entered!
10:36:39 Sending DDR step (64 bytes)...
10:36:39 Sending SPL (24576 bytes)...
10:36:45 SPL chunk 12 failed
Second attempt and further stopped at 96% , log:
10:47:51 Firmware download failed: Failed to fetch
10:48:15 Waiting for bootrom... power-cycle the device now!
10:48:28 Boot mode entered!
10:48:28 Sending DDR step (64 bytes)...
10:48:28 Sending SPL (24576 bytes)...
10:48:31 Sending U-Boot (516908 bytes)...
10:48:31 U-Boot HEAD failed
All next attempt - the same, tried to change port . The board doesn't react on Enter or ctrl-C within the boot , by shorting 5-6 pins of hangs.

[widgetii]

Could you please provide more information about your environment, such as the operating system, browser, UART adapter, and so on?

[sergshadrap]

Tried on Windows 10 machine , under Opera One 126 ( I think the newest one) , adapter is FTDI232 . The further investigation clear that the flash was locked down. Eventually was wiped and re-flashed with CH341. Unfortunately can't do more comment due to OpenIpc now that board. Thanks!