#5368 - Wrap OutputTableAnnual and OutputTableMonthly

.gitignore

@@ -27,10 +27,10 @@ test/*out_*.sqltest
 test/*out_*.xml
 # TODO: keep updating as new versions are incoming
 # We do not commit the current develop version until it's final
-test/*_3.9.1*_out.osw
-test/*_3.9.1*_out*.status
-test/*_3.9.1*_out.sqltest
-test/*_3.9.1*_out*.xml
+test/*_3.10.0*_out.osw
+test/*_3.10.0*_out*.status
+test/*_3.10.0*_out.sqltest
+test/*_3.10.0*_out*.xml
 # Ignore alphas and rcs. CI will force add anything under test/ so it's unaffected
 test/*_[0-9].[0-9].[0-9]-*_out*
 

model/simulationtests/output_tables.py

@@ -0,0 +1,137 @@
+# This test aims to test the new **Unique** ModelObjects related to Output
+# added in 3.0.0:
+# * OutputDiagnostics,
+# * OutputDebuggingData,
+# * OutputJSON, and
+# * OutputTableSummaryReports
+
+import openstudio
+
+from lib.baseline_model import BaselineModel
+
+model = BaselineModel()
+
+# make a 1 story, 100m X 50m, 1 zone building
+model.add_geometry(length=100, width=50, num_floors=1, floor_to_floor_height=4, plenum_height=0, perimeter_zone_depth=0)
+
+# add windows at a 40% window-to-wall ratio
+model.add_windows(wwr=0.4, offset=1, application_type="Above Floor")
+
+# add thermostats
+model.add_thermostats(heating_setpoint=19, cooling_setpoint=26)
+
+# assign constructions from a local library to the walls/windows/etc. in the model
+model.set_constructions()
+
+# set whole building space type; simplified 90.1-2004 Large Office Whole Building
+model.set_space_type()
+
+# add design days to the model (Chicago)
+model.add_design_days()
+
+# In order to produce more consistent results between different runs,
+# we sort the zones by names
+# (There's only one here, but just in case this would be copy pasted somewhere
+# else...)
+zones = sorted(model.getThermalZones(), key=lambda z: z.nameString())
+z = zones[0]
+z.setUseIdealAirLoads(True)
+
+###############################################################################
+#                            OUTPUT:TABLE:MONTHLY                             #
+###############################################################################
+
+# Factory method to creates a OutputTableMonthly from the E+ datasets/StandardReports.idf
+# Please use the OutputTableMonthly.validStandardReportNames() static method
+# to look up the valid names as it will throw if it cannot find it
+standardReportName = next(reversed(sorted(openstudio.model.OutputTableMonthly.validStandardReportNames())))
+output_table_monthly = openstudio.model.OutputTableMonthly.fromStandardReports(model, standardReportName)
+
+# You can of course create one yourself
+output_table_monthly = openstudio.model.OutputTableMonthly(model)
+output_table_monthly.setName("Fan Report")
+output_table_monthly.setDigitsAfterDecimal(4)
+
+# To add a group, you can use the convenience method
+# bool addMonthlyVariableGroup(std.string variableOrMeterName, std.string aggregationType = "SumOrAverage");
+
+groups = [
+    # variableOrMeterName, SumOrAverage
+    ("Fan Electricity Energy", "SumOrAverage"),
+    ("Fan Rise in Air Temperature", "SumOrAverage"),
+    ("Fan Electricity Rate", "Maximum"),
+    ("Fan Rise in Air Temperature", "ValueWhenMaximumOrMinimum"),
+]
+output_table_monthly.addMonthlyVariableGroup(groups[0][0], groups[0][1])
+
+# This will in turn actually use the helper class MonthlyVariableGroup
+output_table_monthly.addMonthlyVariableGroup(openstudio.model.MonthlyVariableGroup(groups[1][0], groups[1][1]))
+
+assert output_table_monthly.numberofMonthlyVariableGroups() == 2
+# This is a vector of MonthlyVariableGroup
+assert len(output_table_monthly.monthlyVariableGroups()) == 2
+first_monthly_group = output_table_monthly.monthlyVariableGroups()[0]
+# This returns an OptionalMonthlyVariableGroup
+first_monthly_group_ = output_table_monthly.getMonthlyVariableGroup(0)
+assert first_monthly_group_.is_initialized()
+# The equality operator is defined to check for both variableOrMeterName and
+# aggregationType
+assert first_monthly_group == first_monthly_group_.get()
+assert first_monthly_group.variableOrMeterName() == "Fan Electricity Energy"
+assert first_monthly_group.aggregationType() == "SumOrAverage"
+
+output_table_monthly.removeMonthlyVariableGroup(1)
+output_table_monthly.removeAllMonthlyVariableGroups()
+
+# There is also a batch add
+monthly_groups = [openstudio.model.MonthlyVariableGroup(g[0], g[1]) for g in groups]
+output_table_monthly.addMonthlyVariableGroups(monthly_groups)
+assert output_table_monthly.numberofMonthlyVariableGroups() == 4
+
+###############################################################################
+#                             OUTPUT:TABLE:ANNUAL                             #
+###############################################################################
+
+output_table_annual = openstudio.model.OutputTableAnnual(model)
+output_table_annual.setName("Electricity Report")
+output_table_annual.setSchedule(model.alwaysOnDiscreteSchedule())
+output_table_annual.setFilter("Zone 1")
+output_table_annual.resetFilter()
+
+groups = [
+    # variableorMeterorEMSVariableorField, aggregationType, digitsAfterDecimal
+    ("Electricity:Facility", "SumOrAverage", 3),
+    ("Electricity:Facility", "Maximum", 1),
+]
+
+output_table_annual.addAnnualVariableGroup(groups[0][0], groups[0][1], groups[0][2])
+
+# This will in turn actually use the helper class AnnualVariableGroup
+output_table_annual.addAnnualVariableGroup(
+    openstudio.model.AnnualVariableGroup(groups[1][0], groups[1][1], groups[1][2])
+)
+
+assert output_table_annual.numberofAnnualVariableGroups() == 2
+# This is a vector of AnnualVariableGroup
+assert len(output_table_annual.annualVariableGroups()) == 2
+first_annual_group = output_table_annual.annualVariableGroups()[0]
+# This returns an OptionalAnnualVariableGroup
+first_annual_group_ = output_table_annual.getAnnualVariableGroup(0)
+assert first_annual_group_.is_initialized()
+# The equality operator is defined to check for both variableorMeterorEMSVariableorField and
+# aggregationType
+assert first_annual_group == first_annual_group_.get()
+assert first_annual_group.variableorMeterorEMSVariableorField() == "Electricity:Facility"
+assert first_annual_group.aggregationType() == "SumOrAverage"
+assert first_annual_group.digitsAfterDecimal() == 3
+
+output_table_annual.removeAnnualVariableGroup(1)
+output_table_annual.removeAllAnnualVariableGroups()
+
+# There is also a batch add
+annual_groups = [openstudio.model.AnnualVariableGroup(g[0], g[1], g[2]) for g in groups]
+output_table_annual.addAnnualVariableGroups(annual_groups)
+assert output_table_annual.numberofAnnualVariableGroups() == 2
+
+# save the OpenStudio model (.osm)
+model.save_openstudio_osm(osm_save_directory=None, osm_name="in.osm")

model/simulationtests/output_tables.rb

@@ -0,0 +1,147 @@
+# frozen_string_literal: true
+
+# This test aims to test the new **Unique** ModelObjects related to Output
+# added in 3.0.0:
+# * OutputDiagnostics,
+# * OutputDebuggingData,
+# * OutputJSON, and
+# * OutputTableSummaryReports
+
+require 'openstudio'
+require_relative 'lib/baseline_model'
+
+model = BaselineModel.new
+
+# make a 1 story, 100m X 50m, 1 zone building
+model.add_geometry({ 'length' => 100,
+                     'width' => 50,
+                     'num_floors' => 1,
+                     'floor_to_floor_height' => 4,
+                     'plenum_height' => 0,
+                     'perimeter_zone_depth' => 0 })
+
+# add windows at a 40% window-to-wall ratio
+model.add_windows({ 'wwr' => 0.4,
+                    'offset' => 1,
+                    'application_type' => 'Above Floor' })
+
+# add thermostats
+model.add_thermostats({ 'heating_setpoint' => 19,
+                        'cooling_setpoint' => 26 })
+
+# assign constructions from a local library to the walls/windows/etc. in the model
+model.set_constructions
+
+# set whole building space type; simplified 90.1-2004 Large Office Whole Building
+model.set_space_type
+
+# add design days to the model (Chicago)
+model.add_design_days
+
+# In order to produce more consistent results between different runs,
+# we sort the zones by names
+# (There's only one here, but just in case this would be copy pasted somewhere
+# else...)
+zones = model.getThermalZones.sort_by { |z| z.name.to_s }
+z = zones[0]
+z.setUseIdealAirLoads(true)
+
+###############################################################################
+#                            OUTPUT:TABLE:MONTHLY                             #
+###############################################################################
+
+# Factory method to creates a OutputTableMonthly from the E+ datasets/StandardReports.idf
+# Please use the OutputTableMonthly::validStandardReportNames() static method
+# to look up the valid names as it will throw if it cannot find it
+standardReportName = OpenStudio::Model::OutputTableMonthly.validStandardReportNames.sort.reverse[0]
+output_table_monthly = OpenStudio::Model::OutputTableMonthly.fromStandardReports(model, standardReportName)
+
+# You can of course create one yourself
+output_table_monthly = OpenStudio::Model::OutputTableMonthly.new(model)
+output_table_monthly.setName('Fan Report')
+output_table_monthly.setDigitsAfterDecimal(4)
+
+# To add a group, you can use the convenience method
+# bool addMonthlyVariableGroup(std::string variableOrMeterName, std::string aggregationType = "SumOrAverage");
+
+groups = [
+  # variableOrMeterName, SumOrAverage
+  ['Fan Electricity Energy', 'SumOrAverage'],
+  ['Fan Rise in Air Temperature', 'SumOrAverage'],
+  ['Fan Electricity Rate', 'Maximum'],
+  ['Fan Rise in Air Temperature', 'ValueWhenMaximumOrMinimum']
+]
+output_table_monthly.addMonthlyVariableGroup(groups[0][0], groups[0][1])
+
+# This will in turn actually use the helper class MonthlyVariableGroup
+output_table_monthly.addMonthlyVariableGroup(OpenStudio::Model::MonthlyVariableGroup.new(groups[1][0], groups[1][1]))
+
+raise unless output_table_monthly.numberofMonthlyVariableGroups == 2
+# This is a vector of MonthlyVariableGroup
+raise unless output_table_monthly.monthlyVariableGroups.size == 2
+
+first_monthly_group = output_table_monthly.monthlyVariableGroups.first
+# This returns an OptionalMonthlyVariableGroup
+first_monthly_group_ = output_table_monthly.getMonthlyVariableGroup(0)
+raise unless first_monthly_group_.is_initialized
+# The equality operator is defined to check for both variableOrMeterName and
+# aggregationType
+raise unless first_monthly_group == first_monthly_group_.get
+raise unless first_monthly_group.variableOrMeterName == 'Fan Electricity Energy'
+raise unless first_monthly_group.aggregationType == 'SumOrAverage'
+
+output_table_monthly.removeMonthlyVariableGroup(1)
+output_table_monthly.removeAllMonthlyVariableGroups
+
+# There is also a batch add
+monthly_groups = groups.map { |g| OpenStudio::Model::MonthlyVariableGroup.new(g[0], g[1]) }
+output_table_monthly.addMonthlyVariableGroups(monthly_groups)
+raise unless output_table_monthly.numberofMonthlyVariableGroups == 4
+
+###############################################################################
+#                             OUTPUT:TABLE:ANNUAL                             #
+###############################################################################
+
+output_table_annual = OpenStudio::Model::OutputTableAnnual.new(model)
+output_table_annual.setName('Electricity Report')
+output_table_annual.setSchedule(model.alwaysOnDiscreteSchedule)
+output_table_annual.setFilter('Zone 1')
+output_table_annual.resetFilter
+
+groups = [
+  # variableorMeterorEMSVariableorField, aggregationType, digitsAfterDecimal
+  ['Electricity:Facility', 'SumOrAverage', 3],
+  ['Electricity:Facility', 'Maximum', 1]
+]
+
+output_table_annual.addAnnualVariableGroup(groups[0][0], groups[0][1], groups[0][2])
+
+# This will in turn actually use the helper class AnnualVariableGroup
+output_table_annual.addAnnualVariableGroup(OpenStudio::Model::AnnualVariableGroup.new(groups[1][0], groups[1][1], groups[1][2]))
+
+raise unless output_table_annual.numberofAnnualVariableGroups == 2
+# This is a vector of AnnualVariableGroup
+raise unless output_table_annual.annualVariableGroups.size == 2
+
+first_annual_group = output_table_annual.annualVariableGroups.first
+# This returns an OptionalAnnualVariableGroup
+first_annual_group_ = output_table_annual.getAnnualVariableGroup(0)
+raise unless first_annual_group_.is_initialized
+# The equality operator is defined to check for both variableorMeterorEMSVariableorField and
+# aggregationType
+raise unless first_annual_group == first_annual_group_.get
+raise unless first_annual_group.variableorMeterorEMSVariableorField == 'Electricity:Facility'
+raise unless first_annual_group.aggregationType == 'SumOrAverage'
+raise unless first_annual_group.digitsAfterDecimal == 3
+
+output_table_annual.removeAnnualVariableGroup(1)
+output_table_annual.removeAllAnnualVariableGroups
+
+# There is also a batch add
+annual_groups = groups.map { |g| OpenStudio::Model::AnnualVariableGroup.new(g[0], g[1], g[2]) }
+output_table_annual.addAnnualVariableGroups(annual_groups)
+raise unless output_table_annual.numberofAnnualVariableGroups == 2
+
+# save the OpenStudio model (.osm)
+model.save_openstudio_osm({ 'osm_save_directory' => Dir.pwd,
+                            'osm_name' => 'in.osm' })

model_tests.rb

@@ -1351,6 +1351,19 @@ def test_output_objects_2_osm
     result = sim_test('output_objects_2.osm')
   end
 
+  def test_output_tables_rb
+    result = sim_test('output_tables.rb')
+  end
+
+  def test_output_tables_py
+    result = sim_test('output_tables.py')
+  end
+
+  # TODO: To be added in the next official release after: 3.9.0
+  # def test_output_tables_osm
+  #   result = sim_test('output_tables.osm')
+  # end
+
   def test_performanceprecisiontradeoffs_rb
     result = sim_test('performanceprecisiontradeoffs.rb')
   end