pytest.ini

[pytest]
# only the files with prefix `pytest_` would be recognized as pytest test scripts.
python_files = pytest_*.py

# ignore PytestExperimentalApiWarning for record_xml_attribute
# set traceback to "short" to prevent the overwhelming tracebacks
addopts =
  -s -vv
  --embedded-services esp,idf
  --tb short
  --strict-markers
  --skip-check-coredump y
  --logfile-extension ".txt"
  --check-duplicates y
  --ignore-glob */managed_components/*
  --ignore pytest-embedded
  --unity-test-report-mode merge
  --ignore-no-tests-collected-error

# ignore DeprecationWarning
filterwarnings =
  ignore::DeprecationWarning:matplotlib.*:
  ignore::DeprecationWarning:google.protobuf.*:
  ignore::FutureWarning

# log related
log_cli = True
log_cli_level = INFO
log_cli_format = %(asctime)s %(levelname)s %(message)s
log_cli_date_format = %Y-%m-%d %H:%M:%S

# junit related
junit_family = xunit1

## log all to `system-out` when case fail
junit_logging = stdout
junit_log_passing_tests = False

markers =
    temp_skip_ci: mark test to be skipped in CI
    temp_skip: mark test to be skipped in CI and locally
    skip_app_downloader: mark test required apps built locally, not downloaded from CI
    require_elf: mark test to be skipped if no elf file is found

env_markers =
    qemu: build and test using qemu, not real target
    macos: tests should be run on macos hosts
    generic: tests should be run on generic runners
    flash_suspend: support flash suspend feature
    eth_ip101: connected via IP101 ethernet transceiver
    eth_lan8720: connected via LAN8720 ethernet transceiver
    eth_rtl8201: connected via RTL8201 ethernet transceiver
    eth_ksz8041: connected via KSZ8041 ethernet transceiver
    eth_dp83848: connected via DP83848 ethernet transceiver
    eth_w5500: SPI Ethernet module with two W5500
    eth_ksz8851snl: SPI Ethernet module with two KSZ8851SNL
    eth_dm9051: SPI Ethernet module with two DM9051
    quad_psram: runners with quad psram
    octal_psram: runners with octal psram
    usb_host_flash_disk: usb host runners with USB flash disk attached
    usb_device: usb device runners
    ethernet_ota: ethernet OTA runners
    flash_encryption: Flash Encryption runners
    flash_encryption_f4r8: Flash Encryption runners with 4-line flash and 8-line psram
    flash_encryption_f8r8: Flash Encryption runners with 8-line flash and 8-line psram
    flash_encryption_ota: Flash Encryption runners with ethernet OTA support with 4mb flash size
    flash_encryption_psram: ESP32 Flash Encryption runners with psram
    flash_multi: Multiple flash chips tests
    psram: Chip has 4-line psram
    ir_transceiver: runners with a pair of IR transmitter and receiver
    twai_transceiver: runners with a TWAI PHY transceiver
    flash_encryption_wifi_high_traffic: Flash Encryption runners with wifi high traffic support
    ethernet: ethernet runner
    ethernet_stress: ethernet runner with stress test
    ethernet_flash_8m: ethernet runner with 8mb flash
    ethernet_router: both the runner and dut connect to the same router through ethernet NIC
    ethernet_vlan: ethernet runner GARM-32-SH-1-R16S5N3
    wifi_ap: a wifi AP in the environment
    wifi_router: both the runner and dut connect to the same wifi router
    wifi_high_traffic: wifi high traffic runners
    wifi_wlan: wifi runner with a wireless NIC
    wifi_iperf: the AP and ESP dut were placed in a shielded box - for iperf test
    Example_ShieldBox: multiple shielded APs connected to shielded ESP DUT via RF cable with programmable attenuator
    xtal_26mhz: runner with 26MHz xtal on board
    xtal_40mhz: runner with 40MHz xtal on board
    external_flash: external flash memory connected via VSPI (FSPI)
    sdcard_sdmode: sdcard running in SD mode, to be removed after test migration
    sdcard_spimode: sdcard running in SPI mode
    emmc: eMMC card
    sdcard: sdcard runner
    MSPI_F8R8: runner with Octal Flash and Octal PSRAM
    MSPI_F4R8: runner with Quad Flash and Octal PSRAM
    MSPI_F4R4: runner with Quad Flash and Quad PSRAM
    flash_120m: runner with 120M supported Flash
    jtag: runner where the chip is accessible through JTAG as well
    usb_serial_jtag: runner where the chip is accessible through builtin JTAG as well
    adc: ADC related tests should run on adc runners
    xtal32k: Runner with external 32k crystal connected
    no32kXtal: Runner with no external 32k crystal connected
    psramv0: Runner with PSRAM version 0
    esp32eco3: Runner with esp32 eco3 connected
    ecdsa_efuse: Runner with test ECDSA private keys programmed in efuse
    ccs811: Runner with CCS811 connected
    nvs_encr_hmac: Runner with test HMAC key programmed in efuse
    i2c_oled: Runner with ssd1306 I2C oled connected
    httpbin: runner for tests that need to access the httpbin service
    flash_4mb: C2 runners with 4 MB flash
    jtag_re_enable: Runner to re-enable jtag which is softly disabled by burning bit SOFT_DIS_JTAG on eFuse
    es8311: Development board that carries es8311 codec
    camera: Runner with camera
    ov5647: Runner with camera ov5647
    esp32s3_eye: Runner for esp32s3_eye and camera ov2640
    multi_dut_modbus_rs485: a pair of runners connected by RS485 bus
    ieee802154: ieee802154 related tests should run on ieee802154 runners.
    openthread_br: tests should be used for openthread border router.
    openthread_bbr: tests should be used for openthread border router linked to Internet.
    openthread_sleep: tests should be used for openthread sleepy device.
    zigbee_multi_dut: zigbee runner which have multiple duts.
    two_duts: the runner has two duts with antenna available.
    generic_multi_device: generic multiple devices whose corresponding gpio pins are connected to each other.
    twai_network: multiple runners form a TWAI network.
    sdio_master_slave: Test sdio multi board, esp32+esp32
    sdio_multidev_32_c6: Test sdio multi board, esp32+esp32c6
    sdio_multidev_32_c61: Test sdio multi board, esp32+esp32c61
    sdio_multidev_p4_c5: Test sdio multi board, esp32p4+esp32c5
    usj_device: Test usb_serial_jtag and usb_serial_jtag is used as serial only (not console)
    twai_std: twai runner with all twai supported targets connect to usb-can adapter
    lp_i2s: lp_i2s runner tested with hp_i2s
    ram_app: ram_app runners
    esp32c3eco7: esp32c3 major version(v1.1) chips
    esp32c2eco4: esp32c2 major version(v2.0) chips
    recovery_bootloader: Runner with recovery bootloader offset set in
    esp32p4_eco4: Runner with esp32p4 eco4 connected
    esp32c5_eco3: Runner with esp32c5 eco3 connected
    rev_default: Runner with default revision connected
    flash_32m: Runner with 32MB flash
    eco4: Runner with SOC chip that is exactly with the ECO4 version