platformio.ini

; PlatformIO Project Configuration File
; Please visit documentation: https://docs.platformio.org/page/projectconf.html

[platformio]
# ------------------------------------------------------------------------------
# ENVIRONMENTS
#
# Please uncomment one of the lines below to select your board(s)
# (use `platformio_override.ini` when building for your own board; see `platformio_override.ini.sample` for an example)
# ------------------------------------------------------------------------------

# CI/PR binaries
default_envs = nodemcuv2
               esp8266_2m
               esp01_1m_full
               nodemcuv2_compat
               esp8266_2m_compat
               esp01_1m_full_compat
               esp32dev_V4  ;; esp32 V4 build supporting audioreactive
               esp32dev
               esp32dev_debug
               esp32_eth
               esp32_eth_V4  ;; esp32-ethernet V4 build supporting audioreactive
               esp32_wrover
               lolin_s2_mini ;; TODO: disabled NeoEsp32RmtMethodIsr
               esp32c3dev
               esp32c6dev_4MB
               ; esp32c6dev_8MB
               esp32c5dev
               esp32c5dev_8MB_qspi
               esp32p4_16MB      ;; P4 360 Mhz 16MB flash - experimental
               ; esp32p4_32MB
               ; esp32P4_400  ;; P4 rev3 400 Mhz - not usable yet
               esp32s3_4M_qspi ;; TODO: disabled NeoEsp32RmtMethodIsr
               esp32c3dev_qio
               esp32S3_wroom2 ;; TODO: disabled NeoEsp32RmtMethodIsr
               esp32s3dev_16MB_opi ;; TODO: disabled NeoEsp32RmtMethodIsr
               esp32s3dev_8MB_opi ;; TODO: disabled NeoEsp32RmtMethodIsr
               esp32s3dev_8MB_qspi ;; TODO: disabled NeoEsp32RmtMethodIsr
               esp32s3dev_8MB_none ;; TODO: disabled NeoEsp32RmtMethodIsr
               esp32s3_4M_qspi ;; TODO: disabled NeoEsp32RmtMethodIsr
               ; HUB75 envs
               esp32dev_hub75_forum_pinout
               esp32s3dev_16MB_opi_hub75 ;; MoonHub - opi PSRAM
               esp32s3dev_4MB_qspi_hub75 ;; HD-WF2 - S3 without PSRAM
               usermods

src_dir  = ./wled00
data_dir = ./wled00/data
build_cache_dir = ~/.buildcache
extra_configs =
  platformio_override.ini
  platformio_release.ini

[common]
# ------------------------------------------------------------------------------
# FLAGS: DEBUG
# esp8266 : see https://docs.platformio.org/en/latest/platforms/espressif8266.html#debug-level
# esp32   : see https://docs.platformio.org/en/latest/platforms/espressif32.html#debug-level
# ------------------------------------------------------------------------------
debug_flags = -D DEBUG=1 -D WLED_DEBUG
  -DDEBUG_ESP_WIFI -DDEBUG_ESP_HTTP_CLIENT -DDEBUG_ESP_HTTP_UPDATE -DDEBUG_ESP_HTTP_SERVER -DDEBUG_ESP_UPDATER -DDEBUG_ESP_OTA -DDEBUG_TLS_MEM ;; for esp8266
  # if needed (for memleaks etc) also add; -DDEBUG_ESP_OOM -include "umm_malloc/umm_malloc_cfg.h"
  # -DDEBUG_ESP_CORE is not working right now

# ------------------------------------------------------------------------------
# FLAGS: ldscript (available ldscripts at https://github.com/esp8266/Arduino/tree/master/tools/sdk/ld)
#    ldscript_2m1m (2048 KB) = 1019 KB sketch, 4 KB eeprom, 1004 KB spiffs, 16 KB reserved
#    ldscript_4m1m (4096 KB) = 1019 KB sketch, 4 KB eeprom, 1002 KB spiffs, 16 KB reserved, 2048 KB empty/ota?
#
# Available lwIP variants (macros):
#    -DPIO_FRAMEWORK_ARDUINO_LWIP_HIGHER_BANDWIDTH  = v1.4 Higher Bandwidth (default)
#    -DPIO_FRAMEWORK_ARDUINO_LWIP2_LOW_MEMORY       = v2 Lower Memory
#    -DPIO_FRAMEWORK_ARDUINO_LWIP2_HIGHER_BANDWIDTH = v2 Higher Bandwidth
#    -DPIO_FRAMEWORK_ARDUINO_LWIP2_HIGHER_BANDWIDTH_LOW_FLASH
#
# BearSSL performance:
#  When building with -DSECURE_CLIENT=SECURE_CLIENT_BEARSSL, please add `board_build.f_cpu = 160000000` to the environment configuration
#
# BearSSL ciphers:
#   When building on core >= 2.5, you can add the build flag -DBEARSSL_SSL_BASIC in order to build BearSSL with a limited set of ciphers:
#     TLS_RSA_WITH_AES_128_CBC_SHA256 / AES128-SHA256
#     TLS_RSA_WITH_AES_256_CBC_SHA256 / AES256-SHA256
#     TLS_RSA_WITH_AES_128_CBC_SHA / AES128-SHA
#     TLS_RSA_WITH_AES_256_CBC_SHA / AES256-SHA
#  This reduces the OTA size with ~45KB, so it's especially useful on low memory boards (512k/1m).
# ------------------------------------------------------------------------------
build_flags =
  -DMQTT_MAX_PACKET_SIZE=1024
  -DSECURE_CLIENT=SECURE_CLIENT_BEARSSL
  -DBEARSSL_SSL_BASIC
  -D CORE_DEBUG_LEVEL=0
  -D NDEBUG
  -Wno-attributes ;; silence warnings about unknown attribute 'maybe_unused' in NeoPixelBus
  #build_flags for the IRremoteESP8266 library (enabled decoders have to appear here)
  -D _IR_ENABLE_DEFAULT_=false
  -D DECODE_HASH=true
  -D DECODE_NEC=true
  -D DECODE_SONY=true
  -D DECODE_SAMSUNG=true
  -D DECODE_LG=true
  -DWLED_USE_MY_CONFIG
  -D WLED_PS_DONT_REPLACE_FX ; PS replacement FX are purely a flash memory saving feature, do not replace classic FX until we run out of flash

build_unflags =

ldscript_1m128k = eagle.flash.1m128.ld
ldscript_2m512k = eagle.flash.2m512.ld
ldscript_2m1m = eagle.flash.2m1m.ld
ldscript_4m1m = eagle.flash.4m1m.ld

default_usermods = audioreactive
;; default_usermods = animartrix ;; for testing
default_usermodsV4 = audioreactive ;; audioreactive is compatible with V4 builds

[scripts_defaults]
extra_scripts =
  pre:pio-scripts/set_metadata.py
  post:pio-scripts/output_bins.py
  post:pio-scripts/strip-floats.py
  post:pio-scripts/dynarray.py
  pre:pio-scripts/user_config_copy.py
  pre:pio-scripts/load_usermods.py
  pre:pio-scripts/build_ui.py
  ;;post:pio-scripts/fastled_cxx_workaround.py
  post:pio-scripts/validate_modules.py  ;; double-check the build output usermods
  ; post:pio-scripts/obj-dump.py  ;; convenience script to create a disassembly dump of the firmware (hardcore debugging)

# ------------------------------------------------------------------------------
# COMMON SETTINGS:
# ------------------------------------------------------------------------------
[env]
framework = arduino
board_build.flash_mode = dout
monitor_speed = 115200
# slow upload speed but most compatible (use platformio_override.ini to use faster speed)
upload_speed = 115200

# ------------------------------------------------------------------------------
# LIBRARIES: required dependencies
#   Please note that we don't always use the latest version of a library.
#
#   The following libraries have been included (and some of them changed) in the source:
#     ArduinoJson@5.13.5, E131@1.0.0(changed), Time@1.5, Timezone@1.2.1
# ------------------------------------------------------------------------------
lib_compat_mode = strict
lib_deps =
    ;; IRremoteESP8266 @ 2.8.2
    ;; https://github.com/Aircoookie/ESPAsyncWebServer.git#v2.4.2
    ;; https://github.com/Makuna/NeoPixelBus.git#1d7ff38f14d04a976f9c6e365c83a232bcba04fc
    crankyoldgit/IRremoteESP8266 @ 2.9.0
    ;; neopixelbus dependancy moved into [8266] and [esp32_all_variants] sections
    ESPAsyncWebServerWLED = git+https://github.com/Aircoookie/ESPAsyncWebServer#ac44e32abf2a69ae650412fb6bc193c59ccac38a
    marvinroger/AsyncMqttClient @ 0.9.0
  # for I2C interface
    ;Wire

extra_scripts = ${scripts_defaults.extra_scripts}

[esp8266]
# ------------------------------------------------------------------------------
# PLATFORM:
#   !! DO NOT confuse platformio's ESP8266 development platform with Arduino core for ESP8266
#
#   arduino core 2.6.3 = platformIO 2.3.2
#   arduino core 2.7.0 = platformIO 2.5.0
# ------------------------------------------------------------------------------
arduino_core_2_6_3 = espressif8266@2.3.3
arduino_core_2_7_4 = espressif8266@2.6.2
arduino_core_3_0_0 = espressif8266@3.0.0
arduino_core_3_0_2 = espressif8266@3.2.0
arduino_core_3_1_0 = espressif8266@4.1.0
arduino_core_3_1_2 = espressif8266@4.2.1

# Development platforms
arduino_core_develop = https://github.com/platformio/platform-espressif8266#develop
arduino_core_git = https://github.com/platformio/platform-espressif8266#feature/stage

# Platform to use for ESP8266
platform_wled_default = ${esp8266.arduino_core_3_1_2}
# We use 2.7.4.7 for all, includes PWM flicker fix and Wstring optimization
#platform_packages = tasmota/framework-arduinoespressif8266 @ 3.20704.7
platform_packages = platformio/toolchain-xtensa @ ~2.100300.220621 #2.40802.200502
                    platformio/tool-esptool #@ ~1.413.0
                    platformio/tool-esptoolpy #@ ~1.30000.0

## previous platform for 8266, in case of problems with the new one
## you'll need  makuna/NeoPixelBus@ 2.6.9 for arduino_core_3_0_2, which does not support Ucs890x
;; platform_wled_default = ${esp8266.arduino_core_3_0_2}
;; platform_packages = tasmota/framework-arduinoespressif8266 @ 3.20704.7
;;                    platformio/toolchain-xtensa @ ~2.40802.200502
;;                    platformio/tool-esptool @ ~1.413.0
;;                    platformio/tool-esptoolpy @ ~1.30000.0

platform = ${esp8266.platform_wled_default}
build_unflags = ${common.build_unflags}
custom_usermods = 
build_flags =
  -DESP8266
  -DFP_IN_IROM
  ;-Wno-deprecated-declarations
  ;-Wno-register  ;; leaves some warnings when compiling C files: command-line option '-Wno-register' is valid for C++/ObjC++ but not for C
  ;-Dregister= # remove warnings in C++17 due to use of deprecated register keyword by the FastLED library ;; warning: this can be dangerous
  -Wno-misleading-indentation
  ; NONOSDK22x_190703 = 2.2.2-dev(38a443e)
  -DPIO_FRAMEWORK_ARDUINO_ESPRESSIF_SDK22x_190703
  ; lwIP 2 - Higher Bandwidth no Features
  ;  -DPIO_FRAMEWORK_ARDUINO_LWIP2_HIGHER_BANDWIDTH_LOW_FLASH
  ; lwIP 1.4 - Higher Bandwidth (Aircoookie has)
  -DPIO_FRAMEWORK_ARDUINO_LWIP_HIGHER_BANDWIDTH
  ; VTABLES in Flash
  -DVTABLES_IN_FLASH
  ; restrict to minimal mime-types
  -DMIMETYPE_MINIMAL
  ; other special-purpose framework flags (see https://docs.platformio.org/en/latest/platforms/espressif8266.html)
  ; decrease code cache size and increase IRAM to fit all pixel functions
  -D PIO_FRAMEWORK_ARDUINO_MMU_CACHE16_IRAM48 ;; in case of linker errors like "section `.text1' will not fit in region `iram1_0_seg'"
  ; -D PIO_FRAMEWORK_ARDUINO_MMU_CACHE16_IRAM48_SECHEAP_SHARED ;; (experimental) adds some extra heap, but may cause slowdown
  -D NON32XFER_HANDLER ;; ask forgiveness for PROGMEM misuse
lib_deps =
  #https://github.com/lorol/LITTLEFS.git
  ESPAsyncTCP @ 1.2.2
  https://github.com/me-no-dev/ESPAsyncUDP.git#697c75a0255e5dccf91b4ef8b5cc28c569b3bac9
  ESP8266PWM
  https://github.com/tignioj/ArduinoUZlib.git#20aff95cd80c141f80bdbf66895409a0046d2c2f
  ${env.lib_deps}
  https://github.com/Makuna/NeoPixelBus.git#1d7ff38f14d04a976f9c6e365c83a232bcba04fc ;; standard NPB version used in main branch
monitor_filters = esp8266_exception_decoder

;; compatibilty flags - same as 0.14.0 which seems to work better on some 8266 boards. Not using PIO_FRAMEWORK_ARDUINO_MMU_CACHE16_IRAM48
build_flags_compat =
  -DESP8266
  -DFP_IN_IROM
  ;;-Wno-deprecated-declarations
  -Wno-misleading-indentation
  ;;-Wno-attributes ;; silence warnings about unknown attribute 'maybe_unused' in NeoPixelBus
  -DPIO_FRAMEWORK_ARDUINO_ESPRESSIF_SDK22x_190703
  -DPIO_FRAMEWORK_ARDUINO_LWIP_HIGHER_BANDWIDTH
  -DVTABLES_IN_FLASH
  -DMIMETYPE_MINIMAL
  -DWLED_SAVE_IRAM ;; needed to prevent linker error

;; this platform version was used for WLED 0.14.0
platform_compat = espressif8266@4.2.0
platform_packages_compat =
                    platformio/toolchain-xtensa @ ~2.100300.220621 #2.40802.200502
                    platformio/tool-esptool #@ ~1.413.0
                    platformio/tool-esptoolpy #@ ~1.30000.0

;; experimental - for using older NeoPixelBus 2.7.9
lib_deps_compat =
  ESPAsyncTCP @ 1.2.2
  https://github.com/me-no-dev/ESPAsyncUDP.git#697c75a0255e5dccf91b4ef8b5cc28c569b3bac9
  ESP8266PWM
  IRremoteESP8266 @ 2.8.2
  makuna/NeoPixelBus @ 2.7.9
  https://github.com/tignioj/ArduinoUZlib.git#20aff95cd80c141f80bdbf66895409a0046d2c2f
  https://github.com/Aircoookie/ESPAsyncWebServer.git#2d3af2c32b1dd1a8fd9fb01d7b51fa3653221a89 ;; v2.4.0 (pinned by commit to avoid PIO annotated-tag checkout warning)

[esp32_all_variants]
lib_deps =
  esp32async/AsyncTCP @ 3.4.10
  bitbank2/AnimatedGIF@^1.4.7
  https://github.com/Aircoookie/GifDecoder.git#bc3af189b6b1e06946569f6b4287f0b79a860f8e
  ;; neopixelbus dependancy temporarily moved into [esp32_idf_V4] and [esp32_idf_V5] sections
build_flags =
  -D CONFIG_ASYNC_TCP_USE_WDT=0
  -D CONFIG_ASYNC_TCP_STACK_SIZE=8192
  -D WLED_ENABLE_GIF

[esp32]
platform = ${esp32_idf_V5.platform}
platform_packages =  ${esp32_idf_V5.platform_packages}
build_unflags = ${esp32_idf_V5.build_unflags}
build_flags = ${esp32_idf_V5.build_flags}
lib_deps = ${esp32_idf_V5.lib_deps}
lib_ignore = ${esp32_idf_V5.lib_ignore}
monitor_filters = esp32_exception_decoder

tiny_partitions = tools/WLED_ESP32_2MB_noOTA.csv
default_partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
extended_partitions = tools/WLED_ESP32_4MB_700k_FS.csv
big_partitions = tools/WLED_ESP32_4MB_256KB_FS.csv     ;; 1.8MB firmware, 256KB filesystem, coredump support
large_partitions = tools/WLED_ESP32_8MB.csv
extreme_partitions = tools/WLED_ESP32_16MB_9MB_FS.csv

board_build.partitions = ${esp32.default_partitions}   ;; default partioning for 4MB Flash - can be overridden in build envs
# additional build flags for audioreactive - must be applied globally
AR_build_flags = ;; -fsingle-precision-constant ;; forces ArduinoFFT to use float math (2x faster)
AR_lib_deps =  ;; for pre-usermod-library platformio_override compatibility

[esp32_idf_V4]
;; build environment for ESP32 using ESP-IDF 4.4.x / arduino-esp32 v2.0.y
;; *** important: build flags from esp32_idf_V4 are inherited by _all_ esp32-based MCUs: esp32, esp32s2, esp32s3, esp32c3

;; tasmota platform (default)
platform = https://github.com/tasmota/platform-espressif32/releases/download/2024.06.00/platform-espressif32.zip ;; Tasmota Arduino Core 2.0.18 with IPv6 support, based on IDF 4.4.8
platform_packages =

;; espressif platform (optional - needs 300KB extra flash)
;;; arduino-esp32 2.0.17 + esp-idf 4.4.7
;; platform = espressif32@ ~6.13.0
;; platform_packages =
;;; arduino-esp32 2.0.14 + esp-idf 4.4.6
;; platform = espressif32@ ~6.6.0
;; platform_packages = platformio/framework-arduinoespressif32 @ 3.20014.231204

build_unflags = ${common.build_unflags}
build_flags = -g
  -Wshadow=compatible-local ;; emit warning in case a local variable "shadows" another local one
  -DARDUINO_ARCH_ESP32 -DESP32
  ${esp32_all_variants.build_flags}
  -D WLED_ENABLE_DMX_INPUT  ;; toDO: DMX input is currently not working with V4 builds
lib_deps =
  ${esp32_all_variants.lib_deps}
  https://github.com/someweisguy/esp_dmx.git#47db25d8c515e76fabcf5fc5ab0b786f98eeade0
  ${env.lib_deps}
  NeoPixelBus = git+https://github.com/Makuna/NeoPixelBus#1d7ff38f14d04a976f9c6e365c83a232bcba04fc ;; latest release + properly inialized buffers
lib_ignore =
  wled-ADCmanager ; ADCmanager is only available on IDF V5.5

[esp32_idf_V5]
;; (default) Platform 2026.05.50 Tasmota Arduino Core 3.3.8.260506 based on IDF 5.5.4.260407
platform = https://github.com/tasmota/platform-espressif32/releases/download/2026.05.50/platform-espressif32.zip
platform_packages =

;; (optional) pioarduino platform - needs 300kB extra flash - Arduino Core v3.3.9 based on ESP-IDF v5.5.4
platform_pioarduino = https://github.com/pioarduino/platform-espressif32/releases/download/55.03.39/platform-espressif32.zip
platform_packages_pioarduino =

build_unflags = ${common.build_unflags}
  -Wno-volatile ;; avoid warning on .c files: "-Wno-volatile only applies to c++ files"
build_flags = -g
  ;;-Wno-deprecated        ;; disables a ton of  warnings: implicit capture of 'this' via '[=]' is deprecated in C++20 [-Wdeprecated]
  -Wshadow=compatible-local ;; emit warning in case a local variable "shadows" another local one
  -DARDUINO_ARCH_ESP32
  ; -DESP32=ESP32 ;; disabled to avoid compiler warning: "ESP32" redefined
  ${esp32_all_variants.build_flags}
  -D WLED_USE_SHARED_RMT     ;; ToDO: check if NeoESP32RmtHI is still needed with V5 (see discussion in PR#4838)
  -D__unreachable=__builtin_unreachable ;; picolibc (new toolchain-xtensa-esp-elf) dropped __unreachable(), but esp_dmx still calls it
  ;;-D WLED_DISABLE_INFRARED ;; ToDO: needs more testing with V5
  ;;-D WLED_DISABLE_MQTT     ;; ToDO: needs more testing with V5
  -D WLED_ENABLE_DMX_INPUT
  -D ESP32_ARDUINO_NO_RGB_BUILTIN ;; avoids RMT driver abort on startup "E (98) rmt(legacy): CONFLICT! driver_ng is not allowed to be used with the legacy driver"
lib_deps =
  ${esp32_all_variants.lib_deps}
  https://github.com/netmindz/esp_dmx/#ed12a2909960c92d7f144d368564e2473bd38c63  ;; esp-idf-v5-fixes branch, pinned; TODO: need an upstream update for V5
  ${env.lib_deps}
  NeoPixelBus = git+https://github.com/Makuna/NeoPixelBus#76afe832f74b0738a3fa1bba0caf389ade9e7693 ;; CORE3 branch
  ;; AsyncMqttClient = git+https://github.com/marvinroger/async-mqtt-client#3d93fc7f662e65366f8e2b0d88b108f874f035b9 ;; override to use latest commmit from Sep 25, 2024
lib_ignore =
  NeoESP32RmtHI
  ;;AsyncMqttClient          ;; uncomment in case you find V5 compatibility problems with this library
  ;;IRremoteESP8266          ;; uncomment in case you find V5 compatibility problems with this library

[v5_pioarduino_workaround]
# This is a disgusting workaround for a pioarduino "feature": if you don't ever mention lib_archive in your platformio.ini
# it forces it off globally, causing unused code from all libraries to be included even if you don't use it.
# This causes FastLED to activate its driver framework, stealing hardware resources we want to use.
# To work around this, all that we have to do is mention lib_archive in any section, even if it's never used; then
# pioarduino believes we know what we're doing, and lets us do what we want.
lib_archive = yes

[esp32s2]
;; generic definitions for all ESP32-S2 boards
platform = ${esp32_idf_V5.platform}
platform_packages = ${esp32_idf_V5.platform_packages}
build_unflags = ${esp32_idf_V5.build_unflags}
build_flags = -g
  -DARDUINO_ARCH_ESP32
  -DARDUINO_ARCH_ESP32S2
  -DCONFIG_IDF_TARGET_ESP32S2=1
  -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=0
  -DARDUINO_USB_MODE=0 ;; this flag is mandatory for ESP32-S2 !
  ;; please make sure that the following flags are properly set (to 0 or 1) by your board.json, or included in your custom platformio_override.ini entry:
  ;; ARDUINO_USB_CDC_ON_BOOT
  ${esp32_idf_V5.build_flags}
lib_deps =
  ${esp32_idf_V5.lib_deps}
lib_ignore = ${esp32_idf_V5.lib_ignore}
board_build.partitions = ${esp32.default_partitions}   ;; default partioning for 4MB Flash - can be overridden in build envs
monitor_filters = esp32_exception_decoder

[esp32c3]
;; generic definitions for all ESP32-C3 boards
platform = ${esp32_idf_V5.platform}
platform_packages = ${esp32_idf_V5.platform_packages}
build_unflags = ${esp32_idf_V5.build_unflags}
build_flags = -g
  -DARDUINO_ARCH_ESP32
  -DARDUINO_ARCH_ESP32C3
  -DCONFIG_IDF_TARGET_ESP32C3=1
  -DARDUINO_USB_MODE=1 ;; this flag is mandatory for ESP32-C3
  ;; please make sure that the following flags are properly set (to 0 or 1) by your board.json, or included in your custom platformio_override.ini entry:
  ;; ARDUINO_USB_CDC_ON_BOOT
  ${esp32_idf_V5.build_flags}
lib_deps =
  ${esp32_idf_V5.lib_deps}
lib_ignore = ${esp32_idf_V5.lib_ignore}
board_build.partitions = ${esp32.default_partitions}   ;; default partioning for 4MB Flash - can be overridden in build envs
board_build.flash_mode = qio
monitor_filters = esp32_exception_decoder

[esp32s3]
;; generic definitions for all ESP32-S3 boards
platform = ${esp32_idf_V5.platform}
platform_packages = ${esp32_idf_V5.platform_packages}
build_unflags = ${esp32_idf_V5.build_unflags}
build_flags = -g
  ;; -DESP32  ;; disabled to avoid compiler warning: "ESP32" redefined
  -DARDUINO_ARCH_ESP32
  -DARDUINO_ARCH_ESP32S3
  -DCONFIG_IDF_TARGET_ESP32S3=1
  -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_DFU_ON_BOOT=0
  ;; please make sure that the following flags are properly set (to 0 or 1) by your board.json, or included in your custom platformio_override.ini entry:
  ;; ARDUINO_USB_MODE, ARDUINO_USB_CDC_ON_BOOT
  ${esp32_idf_V5.build_flags}
lib_deps =
  ${esp32_idf_V5.lib_deps}
lib_ignore = ${esp32_idf_V5.lib_ignore}
board_build.partitions = ${esp32.large_partitions}   ;; default partioning for 8MB flash - can be overridden in build envs
upload_speed = 921600
monitor_filters = esp32_exception_decoder

[esp32c5]
;; generic definitions for all ESP32-C5 boards
platform = ${esp32_idf_V5.platform}
platform_packages = ${esp32_idf_V5.platform_packages}

custom_usermods = ${common.default_usermods}
build_unflags = ${esp32_idf_V5.build_unflags}
  -D WLED_ENABLE_DMX_INPUT  ;; esp_dmx library doesn't support C5 UART registers yet
build_flags = -g
  ;; -Wno-volatile -Wno-deprecated-declarations ;; silence compiler warnings
  -DARDUINO_ARCH_ESP32
  -DARDUINO_ARCH_ESP32C5
  -DCONFIG_IDF_TARGET_ESP32C5=1
  -D CONFIG_ASYNC_TCP_USE_WDT=0
  -D WLED_DISABLE_INFRARED         ;; library causes boot problems on -C5
  ;; please make sure that the following flags are properly set (to 0 or 1) by your board.json, or included in your custom platformio_override.ini entry:
  ;; ARDUINO_USB_MODE
  ;; ARDUINO_USB_CDC_ON_BOOT
  ${esp32_idf_V5.build_flags}
lib_deps = ${esp32_idf_V5.lib_deps}
  ;; NeoPixelBus = https://github.com/jonny190/NeoPixelBus.git#wled-c5-stable ;; jonny190 wled-c5-stable fork C5 support: I2S exclusion, bit-bang CSR/GPIO, channel ctor overload
lib_ignore = ${esp32_idf_V5.lib_ignore}
  esp_dmx  ;; esp_dmx library doesn't support C5 UART registers yet
  IRremoteESP8266   ;; use with WLED_DISABLE_INFRARED for faster compilation

[esp32c6]
;; generic definitions for all ESP32-C6 boards
platform = ${esp32_idf_V5.platform}
platform_packages =  ${esp32_idf_V5.platform_packages}
;;platform_packages =
;;  framework-arduinoespressif32 @ https://github.com/espressif/arduino-esp32.git#3.0.1
;;  framework-arduinoespressif32-libs @ https://github.com/espressif/arduino-esp32/releases/download/3.0.1/esp32-arduino-libs-3.0.1.zip
custom_usermods = ${common.default_usermods}

build_unflags = ${esp32_idf_V5.build_unflags}
  -D WLED_ENABLE_DMX_INPUT  ;; esp_dmx library doesn't support C6 UART registers yet
build_flags = -g
  ;; -Wno-volatile -Wno-deprecated-declarations ;; silence compiler warnings
  -DARDUINO_ARCH_ESP32
  -DARDUINO_ARCH_ESP32C6
  -DCONFIG_IDF_TARGET_ESP32C6=1
  -D CONFIG_ASYNC_TCP_USE_WDT=0
  ;; -D WLED_DISABLE_INFRARED     ;; library not tested yet with -C6
  -DARDUINO_USB_MODE=1 ;; this flag is - most likely - mandatory for ESP32-C6
  ;; please make sure that the following flags are properly set (to 0 or 1) by your board.json, or included in your custom platformio_override.ini entry:
  ;; ARDUINO_USB_CDC_ON_BOOT
  ${esp32_idf_V5.build_flags}
lib_deps = ${esp32_idf_V5.lib_deps}
lib_ignore = ${esp32_idf_V5.lib_ignore}
  esp_dmx  ;; esp_dmx library doesn't support C6 UART registers yet
  ;; IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation

[esp32p4]
;; !! Important: if your board shows errors when trying to start WiFi, the C6 coprocessor might need a firmware update.
;; !! go here ==> https://esp32-c6-firmware-update.github.io/
;; 
;; generic definitions for all ESP32-P4 boards.
;; Using latest tasmota framework - older frameworks only have minimal support for P4
platform = https://github.com/pioarduino/platform-espressif32/releases/download/55.03.37/platform-espressif32.zip
platform_packages =
custom_usermods = ${common.default_usermods} ;; ToDO: audiorective compiles, but not tested on P4 yet
build_unflags = ${esp32_idf_V5.build_unflags}
  -D WLED_ENABLE_DMX_INPUT ;; library not compatible with -P4
  -D WLED_ENABLE_DMX       ;; DMX serial out needs adaptations for P4 compatibility
build_flags = -g
  ;; -Wno-volatile -Wno-deprecated-declarations ;; silence compiler warnings
  -DARDUINO_ARCH_ESP32
  -DARDUINO_ARCH_ESP32P4
  -DCONFIG_IDF_TARGET_ESP32P4=1
  -DBOARD_HAS_PSRAM        ;; all P4 boards have PSRAM support
  -D CONFIG_ASYNC_TCP_USE_WDT=0
  -DARDUINO_USB_MODE=1 ;; this flag is - most likely - mandatory for ESP32-P4
  ;;-D WLED_DISABLE_INFRARED       ;; library not tested yet with -P4
  -D WLED_DISABLE_ESPNOW           ;; ESP-NOW is not possible on P4 (no native Wi-Fi radio)
  ;; please make sure that the following flags are properly set (to 0 or 1) by your board.json, or included in your custom platformio_override.ini entry:
  ;; ARDUINO_USB_CDC_ON_BOOT
  ${esp32_idf_V5.build_flags}

lib_deps = ${esp32_idf_V5.lib_deps}
lib_ignore = ${esp32_idf_V5.lib_ignore}
  ;; IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
  esp_dmx         ; ToDO: disabled until we find a compatible version
  wled-espnow     ; WLED_DISABLE_ESPNOW compiles it empty; validate_modules.py would fail on "no symbols found"


# ------------------------------------------------------------------------------
# EXPERIMENTAL: WLED NEW MCU BUILDS (-C5, -C6, -P4)
# ------------------------------------------------------------------------------

[env:esp32c6dev_8MB]
;; ESP32-C6 "devkit C" with 8MB flash
extends = esp32c6
platform = ${esp32c6.platform}
platform_packages = ${esp32c6.platform_packages}
board = esp32-c6-devkitc-1

build_unflags = ${esp32c6.build_unflags}
  ;;-D CORE_DEBUG_LEVEL=0
  ;;-D NDEBUG
build_flags = ${common.build_flags} ${esp32c6.build_flags} -D WLED_RELEASE_NAME=\"ESP32-C6_8MB\"
  ;;-D DEBUG -g3 -ggdb
  ;;-D CORE_DEBUG_LEVEL=4
  -D WLED_WATCHDOG_TIMEOUT=0
  ;; -DLOLIN_WIFI_FIX ; might be needed on "-C6 mini"
  ;;-DARDUINO_USB_CDC_ON_BOOT=1 ;; for virtual CDC USB
  -DARDUINO_USB_CDC_ON_BOOT=0   ;; for serial-to-USB chip
upload_speed = 460800
lib_deps = ${esp32c6.lib_deps}
lib_ignore = ${esp32c6.lib_ignore}

board_build.partitions = ${esp32.large_partitions}
board_build.f_flash = 80000000L
board_build.flash_mode = qio
board_build.arduino.memory_type = qio_qspi
monitor_filters = esp32_exception_decoder

[env:esp32c6dev_4MB]
;; ESP32-C6 "devkit M" with 4MB flash
extends = env:esp32c6dev_8MB
board = esp32-c6-devkitm-1
board_build.partitions = ${esp32.default_partitions}
build_unflags = ${env:esp32c6dev_8MB.build_unflags} -D WLED_RELEASE_NAME=\"ESP32-C6_8MB\"
build_flags = ${env:esp32c6dev_8MB.build_flags}     -D WLED_RELEASE_NAME=\"ESP32-C6_4MB\"
lib_deps = ${esp32c6.lib_deps}
lib_ignore = ${esp32c6.lib_ignore}
monitor_filters = esp32_exception_decoder


[env:esp32c5dev]
;; ESP32-C5 "devkit C" with 4MB flash, no PSRAM - EXPERIMENTAL
extends = esp32c5
board = esp32-c5-devkitc-1
board_build.f_flash = 80000000L
board_build.flash_mode = qio
board_build.arduino.memory_type = qio_qspi  ;; flash config only, this board has no PSRAM

build_flags = ${common.build_flags} ${esp32c5.build_flags} -D WLED_RELEASE_NAME=\"ESP32-C5\"
  -D WLED_WATCHDOG_TIMEOUT=0
  -DARDUINO_USB_MODE=1            ;; this flag is mandatory for ESP32-C5
  -DARDUINO_USB_CDC_ON_BOOT=0     ;; for serial-to-USB chip
  ;; -D WLED_DEBUG
lib_deps = ${esp32c5.lib_deps}
lib_ignore = ${esp32c5.lib_ignore}
board_build.partitions = ${esp32.big_partitions}
upload_speed = 460800
monitor_filters = esp32_exception_decoder

[env:esp32c5dev_8MB_qspi]
;; ESP32-C5 with 8MB flash and PSRAM - EXPERIMENTAL
extends = esp32c5
board = esp32-c5-devkitc1-n8r4
board_build.f_flash = 80000000L
board_build.flash_mode = qio
board_build.arduino.memory_type = qio_qspi  ;; this board has PSRAM

build_flags = ${common.build_flags} ${esp32c5.build_flags} -D WLED_RELEASE_NAME=\"ESP32-C5_8MB_qspi\"
  -D BOARD_HAS_PSRAM
  -D WLED_WATCHDOG_TIMEOUT=0
  -DARDUINO_USB_MODE=1            ;; this flag is mandatory for ESP32-C5
  -DARDUINO_USB_CDC_ON_BOOT=0     ;; for serial-to-USB chip
  ;; -D WLED_DEBUG
lib_deps = ${esp32c5.lib_deps}
lib_ignore = ${esp32c5.lib_ignore}
board_build.partitions = ${esp32.large_partitions}
board_upload.flash_size = 8MB
board_upload.maximum_size = 8388608
upload_speed = 460800
monitor_filters = esp32_exception_decoder


[env:esp32p4_16MB]
;; (experimental) ESP32-P4 with 16 MB Flash, 32MB PSRAM
;; https://www.waveshare.com/esp32-p4-nano.htm
extends = esp32p4
platform = ${esp32p4.platform}
platform_packages = ${esp32p4.platform_packages}
board = esp32-p4-evboard       ;; P4 eval board, 360Mhz
;; board = esp32-p4_r3-evboard ;; P4 eval board with "revision 3" CPU, 400Mhz
;; board = esp32-p4    ;; 360Mhz
;; board = esp32-p4_r3 ;; 400Mhz
;;build_type = debug

board_build.flash_mode = qio
board_build.partitions = ${esp32.extreme_partitions}   ;; for 16MB Flash
build_unflags = ${esp32p4.build_unflags}
  ;; -DCORE_DEBUG_LEVEL=0
  ;; -flto
build_flags = ${common.build_flags} ${esp32p4.build_flags}  -D WLED_RELEASE_NAME=\"ESP32-P4_16MB\"
  ;; -D WLED_DEBUG
  ;; -DCORE_DEBUG_LEVEL=3 -g3 -ggdb -fno-lto
lib_ignore = ${esp32p4.lib_ignore}
upload_speed = 460800
monitor_filters = esp32_exception_decoder

[env:esp32p4_32MB]
;; (experimental) ESP32-P4 with 32 MB Flash, 32MB PSRAM
extends = esp32p4
board = esp32-p4-evboard       ;; P4 eval board, 360Mhz
;;board = esp32-p4_r3-evboard  ;; P4 eval board with "revision 3" CPU, 400Mhz
board_build.flash_mode = qio
board_build.partitions = tools/WLED_ESP32_32MB.csv
;;build_type = debug
build_unflags = ${esp32p4.build_unflags}
  ;; -DCORE_DEBUG_LEVEL=0
  ;; -flto
build_flags = ${common.build_flags} ${esp32p4.build_flags}  -D WLED_RELEASE_NAME=\"ESP32-P4_32MB\"
  ;; -D WLED_DEBUG
  ;; -DCORE_DEBUG_LEVEL=3 -g3 -ggdb -fno-lto
upload_speed = 460800
monitor_filters = esp32_exception_decoder

# ------------------------------------------------------------------------------
# WLED BUILDS
# ------------------------------------------------------------------------------

[env:nodemcuv2]
extends = esp8266
board = nodemcuv2
board_build.ldscript = ${common.ldscript_4m1m}
build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_RELEASE_NAME=\"ESP8266\" #-DWLED_DISABLE_2D
  -D WLED_DISABLE_PARTICLESYSTEM2D
custom_usermods = audioreactive

[env:nodemcuv2_compat]
extends = env:nodemcuv2
;; using platform version and build options from WLED 0.14.0
platform = ${esp8266.platform_compat}
platform_packages = ${esp8266.platform_packages_compat}
build_flags = ${common.build_flags} ${esp8266.build_flags_compat} -D WLED_RELEASE_NAME=\"ESP8266_compat\" #-DWLED_DISABLE_2D
  -D WLED_DISABLE_PARTICLESYSTEM2D
;; lib_deps = ${esp8266.lib_deps_compat} ;; experimental - use older NeoPixelBus 2.7.9
custom_usermods = audioreactive

[env:nodemcuv2_160]
extends = env:nodemcuv2
board_build.f_cpu = 160000000L
build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_RELEASE_NAME=\"ESP8266_160\" #-DWLED_DISABLE_2D
  -D WLED_DISABLE_PARTICLESYSTEM2D
custom_usermods = audioreactive

[env:esp8266_2m]
extends = esp8266
board = esp_wroom_02
board_build.ldscript = ${common.ldscript_2m512k}
build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_RELEASE_NAME=\"ESP02\"
  -D WLED_DISABLE_PARTICLESYSTEM2D
  -D WLED_DISABLE_PARTICLESYSTEM1D
custom_usermods = audioreactive

[env:esp8266_2m_compat]
extends = env:esp8266_2m
;; using platform version and build options from WLED 0.14.0
platform = ${esp8266.platform_compat}
platform_packages = ${esp8266.platform_packages_compat}
build_flags = ${common.build_flags} ${esp8266.build_flags_compat} -D WLED_RELEASE_NAME=\"ESP02_compat\" #-DWLED_DISABLE_2D
  -D WLED_DISABLE_PARTICLESYSTEM1D
  -D WLED_DISABLE_PARTICLESYSTEM2D
custom_usermods = audioreactive

[env:esp8266_2m_160]
extends = env:esp8266_2m
board_build.f_cpu = 160000000L
build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_RELEASE_NAME=\"ESP02_160\"
  -D WLED_DISABLE_PARTICLESYSTEM1D
  -D WLED_DISABLE_PARTICLESYSTEM2D
custom_usermods = audioreactive

[env:esp8266_2m_min]
;; Minimal-feature build for ESP02 (2MB flash).
;; Use this to recover from a failed OTA: flash via serial, then OTA-upload the regular esp8266_2m binary.
;; OTA is intentionally kept enabled. All other optional features are stripped to minimise binary size.
extends = esp8266
board = esp_wroom_02
platform = ${esp8266.platform_compat}
platform_packages = ${esp8266.platform_packages_compat} ;; older platform saves 488 bytes flash
board_build.ldscript = ${common.ldscript_2m512k}
build_flags = ${common.build_flags} ${esp8266.build_flags_compat} -D WLED_RELEASE_NAME=\"ESP02_min\"
  -D WLED_DISABLE_ALEXA
  -D WLED_DISABLE_HUESYNC
  -D WLED_DISABLE_INFRARED
  -D WLED_DISABLE_MQTT
  -D WLED_DISABLE_ADALIGHT
  -D WLED_DISABLE_LOXONE
  -D WLED_DISABLE_WEBSOCKETS
  -D WLED_DISABLE_ESPNOW
  -D WLED_DISABLE_2D
  -D WLED_DISABLE_PARTICLESYSTEM1D
  -D WLED_DISABLE_PARTICLESYSTEM2D
  -D WLED_DISABLE_PIXELFORGE
  -D WLED_DISABLE_IMPROV_WIFISCAN
lib_deps = ${esp8266.lib_deps_compat} ;; older NeoPixelBus 2.7.9 saves 340 bytes flash
lib_ignore =                          ;; ignoring unused libs speeds up build time
  IRremoteESP8266
  AsyncMqttClient
  wled-espnow     ; WLED_DISABLE_ESPNOW compiles it empty; validate_modules.py would fail on "no symbols found"
custom_usermods =

[env:esp01_1m_full]
extends = esp8266
board = esp01_1m
board_build.ldscript = ${common.ldscript_1m128k}
build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_RELEASE_NAME=\"ESP01\" -D WLED_DISABLE_OTA
  ; -D WLED_USE_REAL_MATH ;; may fix wrong sunset/sunrise times, at the cost of 7064 bytes FLASH and 975 bytes RAM
  -D WLED_DISABLE_PARTICLESYSTEM1D
  -D WLED_DISABLE_PARTICLESYSTEM2D
  -D WLED_DISABLE_PIXELFORGE

[env:esp01_1m_full_compat]
extends = env:esp01_1m_full
;; using platform version and build options from WLED 0.14.0
platform = ${esp8266.platform_compat}
platform_packages = ${esp8266.platform_packages_compat}
build_flags = ${common.build_flags} ${esp8266.build_flags_compat} -D WLED_RELEASE_NAME=\"ESP01_compat\" -D WLED_DISABLE_OTA #-DWLED_DISABLE_2D
  -D WLED_DISABLE_PARTICLESYSTEM1D
  -D WLED_DISABLE_PARTICLESYSTEM2D
  -D WLED_DISABLE_PIXELFORGE

[env:esp01_1m_full_160]
extends = env:esp01_1m_full
board_build.f_cpu = 160000000L
build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_RELEASE_NAME=\"ESP01_160\" -D WLED_DISABLE_OTA
  ; -D WLED_USE_REAL_MATH ;; may fix wrong sunset/sunrise times, at the cost of 7064 bytes FLASH and 975 bytes RAM
  -D WLED_DISABLE_PARTICLESYSTEM1D
  -D WLED_DISABLE_PARTICLESYSTEM2D
  -D WLED_DISABLE_PIXELFORGE
;; custom_usermods = audioreactive ;; pushed program flash size over the limits

[env:esp32dev_V4]
;; uses V4 framework - for checking that the code still builds in V4
board = esp32dev
platform = ${esp32_idf_V4.platform}
platform_packages = ${esp32_idf_V4.platform_packages}
build_unflags = ${esp32_idf_V4.build_unflags}
  -D WLED_ENABLE_DMX_INPUT ;; TODO: fix lots of compile errors in dmx_input.cpp
custom_usermods = ${common.default_usermodsV4}
build_flags = ${common.build_flags} ${esp32_idf_V4.build_flags} -D WLED_RELEASE_NAME=\"ESP32_V4\" #-D WLED_DISABLE_BROWNOUT_DET
              -DARDUINO_USB_CDC_ON_BOOT=0 ;; this flag is mandatory for "classic ESP32" when building with arduino-esp32 >=2.0.3
lib_deps = ${esp32_idf_V4.lib_deps}
lib_ignore = ${esp32_idf_V4.lib_ignore}
  esp_dmx                     ;; TODO: fix lots of compile errors in dmx_input.cpp
monitor_filters = esp32_exception_decoder
board_build.partitions = ${esp32.default_partitions}
board_build.flash_mode = dio

[env:esp32dev]
board = esp32dev
platform = ${esp32_idf_V5.platform}
platform_packages = ${esp32_idf_V5.platform_packages}
build_unflags = ${esp32_idf_V5.build_unflags}
custom_usermods = ${common.default_usermods}
build_flags = ${common.build_flags} ${esp32_idf_V5.build_flags} -D WLED_RELEASE_NAME=\"ESP32\" #-D WLED_DISABLE_BROWNOUT_DET
              -DARDUINO_USB_CDC_ON_BOOT=0 ;; this flag is mandatory for "classic ESP32" when building with arduino-esp32 >=2.0.3
lib_deps = ${esp32_idf_V5.lib_deps}
lib_ignore = ${esp32_idf_V5.lib_ignore}
monitor_filters = esp32_exception_decoder
board_build.partitions = ${esp32.default_partitions}
board_build.flash_mode = dio

[env:esp32dev_debug]
extends = env:esp32dev
;;build_type = debug ;; disabled - leads to stack smashing in ArduinoJSON "Unhandled debug exception: Stack canary watchpoint triggered (loopTask)"
monitor_filters = esp32_exception_decoder
upload_speed = 921600
custom_usermods = ${common.default_usermods}
build_unflags = ${esp32_idf_V5.build_unflags}
              -D WLED_RELEASE_NAME=\"ESP32\"
              ;; -DCORE_DEBUG_LEVEL=0
              ;; -DNDEBUG ;; re-enable debug assertions
              -flto -flto=auto ;; remove LTO flags, to make stack traces usable
build_flags = ${common.build_flags} ${esp32_idf_V5.build_flags}
              -D WLED_DEBUG
              -D WLED_RELEASE_NAME=\"ESP32_DEBUG\"
              -DARDUINO_USB_CDC_ON_BOOT=0
              ;; -DCORE_DEBUG_LEVEL=2 -D WLED_DISABLE_ESPNOW
              -g3 -ggdb -fno-lto ;; to make stack traces meaningful again
lib_deps = ${esp32_idf_V5.lib_deps}
lib_ignore = ${esp32_idf_V5.lib_ignore} 

[env:esp32dev_8M]
board = esp32dev
platform = ${esp32_idf_V5.platform}
platform_packages = ${esp32_idf_V5.platform_packages}
custom_usermods = ${common.default_usermods}
build_unflags = ${esp32_idf_V5.build_unflags}
build_flags = ${common.build_flags} ${esp32_idf_V5.build_flags} -D WLED_RELEASE_NAME=\"ESP32_8M\" #-D WLED_DISABLE_BROWNOUT_DET
  -DARDUINO_USB_CDC_ON_BOOT=0 ;; this flag is mandatory for "classic ESP32" when building with arduino-esp32 >=2.0.3
lib_deps = ${esp32_idf_V5.lib_deps}
lib_ignore = ${esp32_idf_V5.lib_ignore}
monitor_filters = esp32_exception_decoder
board_build.partitions = ${esp32.large_partitions}
board_upload.flash_size = 8MB
board_upload.maximum_size = 8388608
; board_build.f_flash = 80000000L

[env:esp32dev_16M]
board = esp32dev
platform = ${esp32_idf_V5.platform}
platform_packages = ${esp32_idf_V5.platform_packages}
custom_usermods = ${common.default_usermods}
build_unflags = ${esp32_idf_V5.build_unflags}
build_flags = ${common.build_flags} ${esp32_idf_V5.build_flags} -D WLED_RELEASE_NAME=\"ESP32_16M\" #-D WLED_DISABLE_BROWNOUT_DET
              -DARDUINO_USB_CDC_ON_BOOT=0 ;; this flag is mandatory for "classic ESP32" when building with arduino-esp32 >=2.0.3
lib_deps = ${esp32_idf_V5.lib_deps}
lib_ignore = ${esp32_idf_V5.lib_ignore}
monitor_filters = esp32_exception_decoder
board_build.partitions = ${esp32.extreme_partitions}
board_upload.flash_size = 16MB
board_upload.maximum_size = 16777216
board_build.f_flash = 80000000L


[env:esp32_eth_V4]
extends = env:esp32dev_V4
board = esp32-poe
upload_speed = 921600
build_unflags = ${esp32_idf_V4.build_unflags} 
              -D WLED_ENABLE_DMX_INPUT ;; TODO: fix lots of compile errors in dmx_input.cpp
build_flags = ${common.build_flags} ${esp32_idf_V4.build_flags} -D WLED_RELEASE_NAME=\"ESP32_Ethernet_V4\" -D RLYPIN=-1 -D WLED_USE_ETHERNET -D BTNPIN=-1
              -D SR_DMTYPE=-1 -D AUDIOPIN=-1 -D I2S_SDPIN=-1 -D I2S_WSPIN=-1 -D I2S_CKPIN=-1 -D MCLK_PIN=-1 ;; force AR to not allocate any PINs at startup
              -D DATA_PINS=4 ;; default led pin = 16 conflicts with pins used for ethernet
              ; -D WLED_DISABLE_ESPNOW ;; ESP-NOW requires wifi, may crash with ethernet only => uncomment if your board uses ETH_CLOCK_GPIO0_OUT, ETH_CLOCK_GPIO16_OUT, ETH_CLOCK_GPIO17_OUT
              -DARDUINO_USB_CDC_ON_BOOT=0 ;; this flag is mandatory for "classic ESP32" when building with arduino-esp32 >=2.0.3
lib_ignore = ${esp32_idf_V4.lib_ignore}
              esp_dmx                  ;; TODO: fix lots of compile errors in dmx_input.cpp
board_build.partitions = ${esp32.default_partitions}
board_build.flash_mode = dio

[env:esp32_eth]
extends = env:esp32dev
board = esp32-poe
platform = ${esp32_idf_V5.platform}
platform_packages = ${esp32_idf_V5.platform_packages}
upload_speed = 921600
custom_usermods = ${common.default_usermods}
build_unflags = ${esp32_idf_V5.build_unflags}
build_flags = ${common.build_flags} ${esp32_idf_V5.build_flags} -D WLED_RELEASE_NAME=\"ESP32_Ethernet\" -D RLYPIN=-1 -D WLED_USE_ETHERNET -D BTNPIN=-1
              -D SR_DMTYPE=-1 -D AUDIOPIN=-1 -D I2S_SDPIN=-1 -D I2S_WSPIN=-1 -D I2S_CKPIN=-1 -D MCLK_PIN=-1 ;; force AR to not allocate any PINs at startup
              -D DATA_PINS=4 ;; default led pin = 16 conflicts with pins used for ethernet
              ; -D WLED_DISABLE_ESPNOW ;; ESP-NOW requires wifi, may crash with ethernet only => uncomment if your board uses ETH_CLOCK_GPIO0_OUT, ETH_CLOCK_GPIO16_OUT, ETH_CLOCK_GPIO17_OUT
              -DARDUINO_USB_CDC_ON_BOOT=0 ;; this flag is mandatory for "classic ESP32" when building with arduino-esp32 >=2.0.3
lib_deps = ${esp32_idf_V5.lib_deps}
lib_ignore = ${esp32_idf_V5.lib_ignore}
board_build.partitions = ${esp32.default_partitions}
board_build.flash_mode = dio


[env:esp32_wrover]
extends = esp32_idf_V5
board = ttgo-t7-v14-mini32
board_build.f_flash = 80000000L
board_build.flash_mode = qio
board_build.partitions = ${esp32.extended_partitions}
custom_usermods = ${common.default_usermods}
build_unflags = ${esp32_idf_V5.build_unflags}
build_flags = ${common.build_flags} ${esp32_idf_V5.build_flags} -D WLED_RELEASE_NAME=\"ESP32_WROVER\"
  -DARDUINO_USB_CDC_ON_BOOT=0 ;; this flag is mandatory for "classic ESP32" when building with arduino-esp32 >=2.0.3
  -DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue ;; Older ESP32 (rev.<3) need a PSRAM fix (increases static RAM used) https://docs.espressif.com/projects/esp-idf/en/stable/esp32/api-guides/external-ram.html
  -D DATA_PINS=25
lib_deps = ${esp32_idf_V5.lib_deps}
  
[env:esp32c3dev]
extends = esp32c3
board = esp32-c3-devkitm-1
custom_usermods = audioreactive
build_flags = ${common.build_flags} ${esp32c3.build_flags} -D WLED_RELEASE_NAME=\"ESP32-C3\"
  -D WLED_WATCHDOG_TIMEOUT=0
  -DLOLIN_WIFI_FIX ; seems to work much better with this
  -DARDUINO_USB_CDC_ON_BOOT=1 ;; for virtual CDC USB
  ;-DARDUINO_USB_CDC_ON_BOOT=0   ;; for serial-to-USB chip
upload_speed = 460800
build_unflags = ${esp32c3.build_unflags}
lib_deps = ${esp32c3.lib_deps}
board_build.flash_mode = dio ; safe default, required for OTA updates to 0.16 from older version which used dio (must match the bootloader!)

[env:esp32c3dev_qio]
extends = env:esp32c3dev
build_flags = ${common.build_flags} ${esp32c3.build_flags} -D WLED_RELEASE_NAME=\"ESP32-C3-QIO\"
board_build.flash_mode = qio ; qio is faster and works on almost all boards (some boards may use dio to get 2 extra pins)

[env:esp32s3dev_16MB_opi]
;; ESP32-S3 development board, with 16MB FLASH and >= 8MB PSRAM (memory_type: qio_opi)
extends = esp32s3
board = esp32-s3-devkitc-1 ;; generic dev board; the next line adds PSRAM support
board_build.arduino.memory_type = qio_opi     ;; use with PSRAM: 8MB or 16MB
platform = ${esp32s3.platform}
platform_packages = ${esp32s3.platform_packages}
upload_speed = 921600
custom_usermods = ${common.default_usermods}
build_unflags = ${esp32s3.build_unflags}
build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=\"ESP32-S3_16MB_opi\"
  -D WLED_WATCHDOG_TIMEOUT=0
  ;-D ARDUINO_USB_CDC_ON_BOOT=0  ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip
  -D ARDUINO_USB_CDC_ON_BOOT=1 ;; -D ARDUINO_USB_MODE=1      ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
  -DBOARD_HAS_PSRAM
lib_deps = ${esp32s3.lib_deps}
lib_ignore = ${esp32s3.lib_ignore}
board_build.partitions = ${esp32.extreme_partitions}
board_upload.flash_size = 16MB
board_upload.maximum_size = 16777216
board_build.f_flash = 80000000L
board_build.flash_mode = qio

[env:esp32s3dev_8MB_opi]
;; ESP32-S3 development board, with 8MB FLASH and >= 8MB PSRAM (memory_type: qio_opi)
extends = esp32s3
board = esp32-s3-devkitc-1 ;; generic dev board; the next line adds PSRAM support
board_build.arduino.memory_type = qio_opi     ;; use with PSRAM: 8MB or 16MB
platform = ${esp32s3.platform}
platform_packages = ${esp32s3.platform_packages}
upload_speed = 921600
custom_usermods = ${common.default_usermods}
build_unflags = ${esp32s3.build_unflags}
build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=\"ESP32-S3_8MB_opi\"
  -D WLED_WATCHDOG_TIMEOUT=0
  ;-D ARDUINO_USB_CDC_ON_BOOT=0  ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip
  -D ARDUINO_USB_CDC_ON_BOOT=1 ;; -D ARDUINO_USB_MODE=1      ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
  -DBOARD_HAS_PSRAM
lib_deps = ${esp32s3.lib_deps}
lib_ignore = ${esp32s3.lib_ignore}
board_build.partitions = ${esp32.large_partitions}
board_build.f_flash = 80000000L
board_build.flash_mode = qio

[env:esp32s3dev_8MB_qspi]
;; generic ESP32-S3 board with 8MB FLASH and PSRAM (memory_type: qio_qspi). Try this one if esp32s3dev_8MB_opi does not work on your board
extends = env:esp32s3dev_8MB_opi
board_build.arduino.memory_type = qio_qspi
board_build.flash_mode = qio
build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=\"ESP32-S3_8MB_qspi\"
  -D WLED_WATCHDOG_TIMEOUT=0
  ;-D ARDUINO_USB_CDC_ON_BOOT=0  ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip
  -D ARDUINO_USB_CDC_ON_BOOT=1 ;; -D ARDUINO_USB_MODE=1      ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
  -DBOARD_HAS_PSRAM
  ;; -DLOLIN_WIFI_FIX ;; uncomment if you have WiFi connectivity problems

[env:esp32s3dev_8MB_none]
;; ESP32-S3 development board, 8MB FLASH, no PSRAM
extends = esp32s3
board = esp32-s3-devkitc-1 ;; generic dev board
custom_usermods = ${common.default_usermods}
build_unflags = ${esp32s3.build_unflags} -DBOARD_HAS_PSRAM ;; make sure PSRAM support is removed
build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=\"ESP32-S3_8MB_none\"
  -D WLED_WATCHDOG_TIMEOUT=0
  ;-D ARDUINO_USB_CDC_ON_BOOT=0  ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip
  -D ARDUINO_USB_CDC_ON_BOOT=1 ;; -D ARDUINO_USB_MODE=1      ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
board_build.f_flash = 80000000L
board_build.flash_mode = qio

[env:esp32S3_wroom2]
;; For ESP32-S3 WROOM-2, a.k.a. ESP32-S3 DevKitC-1 v1.1
;; with >= 16MB FLASH and >= 8MB PSRAM (memory_type: opi_opi)
extends = esp32s3
board = esp32s3camlcd ;; this is the only standard board with "opi_opi"
board_build.arduino.memory_type = opi_opi
upload_speed = 921600
custom_usermods = ${common.default_usermods}
build_unflags = ${esp32s3.build_unflags}
build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=\"ESP32-S3_WROOM-2\"
  -D WLED_WATCHDOG_TIMEOUT=0
  -D ARDUINO_USB_CDC_ON_BOOT=0  ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip
  ;; -D ARDUINO_USB_CDC_ON_BOOT=1 ;; -D ARDUINO_USB_MODE=1      ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
  -DBOARD_HAS_PSRAM
  -D LEDPIN=38 -D DATA_PINS=38 ;; buildin WS2812b LED
  -D BTNPIN=0 -D RLYPIN=16 -D IRPIN=17 -D AUDIOPIN=-1
  ;;-D WLED_DEBUG
  -D SR_DMTYPE=1 -D I2S_SDPIN=13 -D I2S_CKPIN=14 -D I2S_WSPIN=15 -D MCLK_PIN=4  ;; I2S mic
lib_deps = ${esp32s3.lib_deps}
lib_ignore = ${esp32s3.lib_ignore}

board_build.partitions = ${esp32.extreme_partitions}
board_upload.flash_size = 16MB
board_upload.maximum_size = 16777216

[env:esp32S3_wroom2_32MB]
;; For ESP32-S3 WROOM-2 with 32MB Flash, and >= 8MB PSRAM (memory_type: opi_opi)
extends = env:esp32S3_wroom2
build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=\"ESP32-S3_WROOM-2_32MB\"
  -D WLED_WATCHDOG_TIMEOUT=0
  -D ARDUINO_USB_CDC_ON_BOOT=0  ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip
  ;; -D ARDUINO_USB_CDC_ON_BOOT=1 ;; -D ARDUINO_USB_MODE=1      ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
  -DBOARD_HAS_PSRAM
  -D LEDPIN=38 -D DATA_PINS=38 ;; buildin WS2812b LED
  -D BTNPIN=0 -D RLYPIN=16 -D IRPIN=17 -D AUDIOPIN=-1
  ;;-D WLED_DEBUG
  -D SR_DMTYPE=1 -D I2S_SDPIN=13 -D I2S_CKPIN=14 -D I2S_WSPIN=15 -D MCLK_PIN=4  ;; I2S mic
board_build.partitions = tools/WLED_ESP32_32MB.csv
board_upload.flash_size = 32MB
board_upload.maximum_size = 33554432

[env:esp32s3_4M_qspi]
;; ESP32-S3, with 4MB FLASH and <= 4MB PSRAM (memory_type: qio_qspi)
extends = esp32s3
board = lolin_s3_mini ;; -S3 mini, 4MB flash 2MB PSRAM 
upload_speed = 921600
custom_usermods = ${common.default_usermods}
build_unflags = ${esp32s3.build_unflags}
build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=\"ESP32-S3_4M_qspi\"
  -DARDUINO_USB_CDC_ON_BOOT=1 ;; -DARDUINO_USB_MODE=1      ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
  -DBOARD_HAS_PSRAM
  -DLOLIN_WIFI_FIX ; seems to work much better with this
  -D WLED_WATCHDOG_TIMEOUT=0
lib_deps = ${esp32s3.lib_deps}
lib_ignore = ${esp32s3.lib_ignore}
board_build.partitions = ${esp32.default_partitions}
board_build.f_flash = 80000000L
board_build.flash_mode = qio

[env:esp32s3_4M_none]
;; ESP32-S3 with 4MB FLASH, no PSRAM
extends = esp32s3
board = esp32-s3-devkitc-1
custom_usermods = audioreactive
build_unflags = ${esp32s3.build_unflags} -D BOARD_HAS_PSRAM ;; make sure PSRAM support is removed
build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=\"ESP32-S3_4M_none\"
  -DARDUINO_USB_CDC_ON_BOOT=1 ;; -DARDUINO_USB_MODE=1      ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
  -DLOLIN_WIFI_FIX ; seems to work much better with this
  -D WLED_WATCHDOG_TIMEOUT=0
board_build.partitions = ${esp32.default_partitions}
board_build.f_flash = 80000000L
board_build.flash_mode = qio


[env:lolin_s2_mini]
extends = esp32s2
board = lolin_s2_mini
board_build.flash_mode = qio
board_build.f_flash = 80000000L
custom_usermods = ${common.default_usermods}
build_unflags = ${esp32s2.build_unflags}
build_flags = ${common.build_flags} ${esp32s2.build_flags} -D WLED_RELEASE_NAME=\"ESP32-S2\"
  -DARDUINO_USB_CDC_ON_BOOT=1
  -DARDUINO_USB_MSC_ON_BOOT=0
  -DARDUINO_USB_DFU_ON_BOOT=0
  -DBOARD_HAS_PSRAM
  -DLOLIN_WIFI_FIX ; seems to work much better with this
  -D WLED_WATCHDOG_TIMEOUT=0
  -D DATA_PINS=16
  -D HW_PIN_SCL=35
  -D HW_PIN_SDA=33
  -D HW_PIN_CLOCKSPI=7
  -D HW_PIN_DATASPI=11
  -D HW_PIN_MISOSPI=9
;  -D STATUSLED=15
lib_deps = ${esp32s2.lib_deps}
lib_ignore = ${esp32s2.lib_ignore}

[env:usermods]
extends = env:esp32dev_V4 ; ToDO: fix usermods build once the main V5 build works without errors and warnings
build_flags = ${common.build_flags} ${esp32_idf_V4.build_flags} -D WLED_RELEASE_NAME=\"ESP32_USERMODS\"
  -DTOUCH_CS=9
custom_usermods = *   ; Expands to all usermods in usermods folder
board_build.partitions = ${esp32.extreme_partitions}  ; We're gonna need a bigger boat

[env:usermods_V5] ;; this is experimental
extends = env:esp32p4_32MB
build_flags = ${common.build_flags} ${esp32p4.build_flags} -D WLED_RELEASE_NAME=\"ESP32P4_USERMODS_V5\" -D BOARD_HAS_PSRAM
  -DTOUCH_CS=9 -DWLED_USE_SD_SPI ;; help a few usermods that require special flags to compile
custom_usermods = *   ; Expands to all usermods in usermods folder

# ------------------------------------------------------------------------------
# Hub75 examples
# ------------------------------------------------------------------------------
# Note: some panels may experience ghosting with default full brightness. use -D WLED_HUB75_MAX_BRIGHTNESS=239 or lower to fix it.

[hub75]
;; Shared values for all HUB75 build envs.

;; Core HUB75 flags - common to every HUB75 build
build_flags =
  -D WLED_ENABLE_HUB75MATRIX -D NO_GFX
  -D NO_CIE1931 ;; disable driver-internal gamma correction
  -D WLED_DEBUG_BUS
  -D LED_TYPES=TYPE_HUB75MATRIX_HS
  ; -D WLED_DEBUG

;; Default I2S mic pins disabled (HUB75 uses GPIOs that would otherwise clash).
;; Envs that wire up a real mic should NOT include this and define I2S_*PIN themselves.
i2s_disable_flags = -D SR_DMTYPE=1 -D I2S_SDPIN=-1 -D I2S_CKPIN=-1 -D I2S_WSPIN=-1 -D MCLK_PIN=-1  ;; Disable to prevent pin clash

;; Pinned HUB75 driver libraries
lib_deps = https://github.com/mrfaptastic/ESP32-HUB75-MatrixPanel-DMA.git#f17fb7fe9d487e9643f919eb5aeedea8d9d1f8d7 ;; 3.0.14

;; Extra flags shared by all S3-based HUB75 builds
s3_build_flags =
  -DARDUINO_USB_CDC_ON_BOOT=1 ;; -DARDUINO_USB_MODE=1      ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
  -DBOARD_HAS_PSRAM
  -DLOLIN_WIFI_FIX ; seems to work much better with this (sets lower TX power)
  -D WLED_WATCHDOG_TIMEOUT=0
  -D S3_LCD_DIV_NUM=20 ;; Attempt to fix wifi performance issue when panel active with S3 chips


[env:esp32dev_hub75]
extends = env:esp32dev_V4
upload_speed = 921600
build_flags = ${common.build_flags} ${esp32_idf_V4.build_flags} ${hub75.build_flags} ${hub75.i2s_disable_flags}
              -DARDUINO_USB_CDC_ON_BOOT=0 ;; this flag is mandatory for "classic ESP32" when building with arduino-esp32 >=2.0.3
              -D WLED_RELEASE_NAME=\"ESP32_HUB75\"
lib_deps = ${esp32_idf_V4.lib_deps}
           ${hub75.lib_deps}

[env:esp32dev_hub75_forum_pinout]
extends = env:esp32dev_hub75
build_flags = ${common.build_flags} ${esp32_idf_V4.build_flags} ${hub75.build_flags} ${hub75.i2s_disable_flags}
              -DARDUINO_USB_CDC_ON_BOOT=0
              -D WLED_RELEASE_NAME=\"ESP32_HUB75_forum_pinout\"
              -D ESP32_FORUM_PINOUT ;; enable for SmartMatrix default pins

[env:esp32s3dev_4MB_qspi_hub75]
; HD-WF2 - NOTE: this board has NO PSRAM, so BOARD_HAS_PSRAM must not be set
; (BOARD_HAS_PSRAM causes the DMA library to allocate only in SPIRAM, which fails without PSRAM)
extends = env:esp32s3dev_8MB_qspi
board_build.partitions = ${esp32.extended_partitions} ;; 1.65MB firmware, 700KB filesystem - only 4MB flash usable on this board
build_unflags = ${esp32s3.build_unflags} -DBOARD_HAS_PSRAM
build_flags = ${common.build_flags} ${esp32s3.build_flags} ${hub75.build_flags} ${hub75.s3_build_flags} ${hub75.i2s_disable_flags}
              -D WLED_RELEASE_NAME=\"ESP32-S3_HD-WF2\"
              -D HD_WF2_PINOUT ;; Huidu HD-WF2 specific GPIO wiring
lib_deps = ${esp32s3.lib_deps}
           ${hub75.lib_deps}

[env:adafruit_matrixportal_esp32s3]
; ESP32-S3 processor, 8 MB flash, 2 MB of PSRAM, dedicated driver pins for HUB75
extends = env:esp32s3dev_8MB_qspi
board = adafruit_matrixportal_esp32s3_wled ; modified board definition: removed flash section that causes FS erase on upload
build_flags = ${common.build_flags} ${esp32s3.build_flags} ${hub75.build_flags} ${hub75.s3_build_flags} ${hub75.i2s_disable_flags}
              -D WLED_RELEASE_NAME=\"ESP32-S3_Adafruit_Matrixportal\"
              -D ARDUINO_ADAFRUIT_MATRIXPORTAL_ESP32S3
lib_deps = ${esp32s3.lib_deps}
           ${hub75.lib_deps}
;; board_build.partitions = tools/partitions-8MB_spiffs-tinyuf2.csv ;; supports adafruit UF2 bootloader

[env:waveshare_esp32s3_32MB_hub75]
;; Waveshare ESP32-S3-RGB-Matrix (memory_type: opi_opi); see https://docs.waveshare.com/ESP32-S3-RGB-Matrix
extends = env:esp32S3_wroom2_32MB
monitor_filters = esp32_exception_decoder
build_unflags = ${env:esp32S3_wroom2_32MB.build_unflags}
  -D WLED_RELEASE_NAME=\"ESP32-S3_WROOM-2_32MB\" ;; need to un-set the relese name before setting a new one
custom_usermods = 
	Internal_Temperature 
	audioreactive = https://github.com/MoonModules/WLED-AudioReactive-Usermod#8d988e985901e00a0a92e119aaa8e3249f817754 ;; SR_DMTYPE 254 fix
	SHTC3_v2 = https://github.com/lost-hope/SHTC3_v2/commit/1f6e3fc7d6135b704aa41fadf09a36cbf6712834
build_flags = ${common.build_flags} ${esp32s3.build_flags} ${hub75.build_flags} ${hub75.s3_build_flags}
  -D WLED_RELEASE_NAME=\"ESP32-S3_Waveshare_HUB75\"
  -D WAVESHARE_S3_PINOUT
  -D BTNPIN=0
  -D I2CSDAPIN=47 -D I2CSCLPIN=48
  -D SR_DMTYPE=9 -D I2S_SDPIN=39 -D I2S_CKPIN=43 -D I2S_WSPIN=38 -D MCLK_PIN=12 ; Waveshare ES8311 Codec pins
  -D UM_SD_SELECT=14 -D UM_SD_CLOCK=1 -D UM_SD_POCI=17 -D UM_SD_PICO=44 ; Waveshare SD Card pins ** Requires updated sd_card from this PR https://github.com/wled/WLED/pull/5679 **
  -D WLED_USE_SD_SPI
  -D SD_PRINT_HOME_DIR
;  -D WLED_DEBUG
lib_deps = ${esp32s3.lib_deps}
  ${hub75.lib_deps}

[env:esp32s3dev_16MB_opi_hub75]
;; MOONHUB HUB75 adapter board (lilygo T7-S3 with 16MB flash and octal PSRAM)
extends = env:esp32s3dev_8MB_opi
board = lilygo-t7-s3
board_build.partitions = ${esp32.extreme_partitions}   ;; for 16MB flash (overrides large_partitions for 8MB)
;; Note: real I2S mic pins are wired here, so we do NOT include ${hub75.i2s_disable_flags}.
build_flags = ${common.build_flags} ${esp32s3.build_flags} ${hub75.build_flags} ${hub75.s3_build_flags}
              -D WLED_RELEASE_NAME=\"ESP32-S3_16MB_opi_HUB75\"
              -D MOONHUB_S3_PINOUT ;; HUB75 pinout
              -D LEDPIN=14 -D BTNPIN=0 -D RLYPIN=15 -D IRPIN=-1 -D AUDIOPIN=-1 ;; defaults that avoid pin conflicts with HUB75
              -D SR_DMTYPE=1 -D I2S_SDPIN=10 -D I2S_CKPIN=11 -D I2S_WSPIN=12 -D MCLK_PIN=-1  ;; I2S mic
lib_deps = ${esp32s3.lib_deps}
           ${hub75.lib_deps}