UDP -jitter Latency one-way time value not available

[vishnubraj]

Hi, i am trying to use this in our network, doesnt it provide the one-way latency ?
i am using it for the Cisco IPsla UDP-jitter, it responce but i dont see the latency one-way time values..
doesnt it support that value? also it would provide the Source to Destination packet loss value right?

core1.syd1#sh ip sla statistics 100
IPSLAs Latest Operation Statistics

IPSLA operation id: 100
Type of operation: udp-jitter
	Latest RTT: 309 milliseconds
Latest operation start time: 13:11:27 UTC Sat Dec 15 2018
Latest operation return code: OK
RTT Values:
	Number Of RTT: 50		RTT Min/Avg/Max: 309/309/310 milliseconds
Latency one-way time:
	Number of Latency one-way Samples: 0
	Source to Destination Latency one way Min/Avg/Max: 0/0/0 milliseconds
	Destination to Source Latency one way Min/Avg/Max: 0/0/0 milliseconds
Jitter Time:
	Number of SD Jitter Samples: 49
	Number of DS Jitter Samples: 49
	Source to Destination Jitter Min/Avg/Max: 0/1/1 milliseconds
	Destination to Source Jitter Min/Avg/Max: 0/1/1 milliseconds
Over Threshold:
	Number Of RTT Over Threshold: 0 (0%)
Packet Loss Values:
	Loss Source to Destination: 0
	Source to Destination Loss Periods Number: 0
	Source to Destination Loss Period Length Min/Max: 0/0
	Source to Destination Inter Loss Period Length Min/Max: 0/0
	Loss Destination to Source: 0
	Destination to Source Loss Periods Number: 0
	Destination to Source Loss Period Length Min/Max: 0/0
	Destination to Source Inter Loss Period Length Min/Max: 0/0
	Out Of Sequence: 0	Tail Drop: 0
	Packet Late Arrival: 0	Packet Skipped: 0
Voice Score Values:
	Calculated Planning Impairment Factor (ICPIF): 0
	Mean Opinion Score (MOS): 0
Number of successes: 37
Number of failures: 1
Operation time to live: Forever

[ytti]

Do the A and B side have same time? It only accepts one-way samples when clocks have 'reasonable' value (within context of RTT).