You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
This is about using Ansel's smart cache system to make sliders work faster and so make Ansel more responsive.
Suppose you are adjusting Exposure by moving the slider with the mouse. Each change in position will almost certainly cause a re-calc of the pipe and the delay that does with that. This is not a fault, just the way it has to be.
However you can also adjust the slider using the left and right arrow keys. Each press causes a fixed amount of movement and by combining with Shift and Control you have coarse and fine adjustments. E.g. for Exposure -
no modifier - increments of 0.04 EV
with shift - 0.2 EV
with ctrl - 0.008
Because the arrow keys are working with known amounts, there is the possibility to pre-calculate the pipe at certain settings, in the background whilst the user is temporarily inactive, so that in the event they move to a calculated setting, the image can be displayed instantly.
Example. The user is using shift and arrow keys to adjust exposure and has just set it to 0.8 EV. Ansel calculates the pipe and displays the result as currently. Ansel then proceeds to calculate the pipe at 1 EV and then 0.6 EV but does not change the image. If the user now presses shift+right arrow, i.e. 1EV, the image is already calculated and can be instantly displayed. It may be that either or both of 1 and 0.6 have already been calculated anyway, in which case no background calcs need doing when the user moves to 0.8. If the user does anything whilst Ansel is calculating adjacent steps, then the speculative calcs are abandoned so the user's latest change can be dealt with.
So the intended result is that as you press left and right to home in on the best exposure, Ansel responds quickly and you can judge the image easily.
reacted with thumbs up emoji reacted with thumbs down emoji reacted with laugh emoji reacted with hooray emoji reacted with confused emoji reacted with heart emoji reacted with rocket emoji reacted with eyes emoji
Uh oh!
There was an error while loading. Please reload this page.
This is about using Ansel's smart cache system to make sliders work faster and so make Ansel more responsive.
Suppose you are adjusting Exposure by moving the slider with the mouse. Each change in position will almost certainly cause a re-calc of the pipe and the delay that does with that. This is not a fault, just the way it has to be.
However you can also adjust the slider using the left and right arrow keys. Each press causes a fixed amount of movement and by combining with Shift and Control you have coarse and fine adjustments. E.g. for Exposure -
no modifier - increments of 0.04 EV
with shift - 0.2 EV
with ctrl - 0.008
Because the arrow keys are working with known amounts, there is the possibility to pre-calculate the pipe at certain settings, in the background whilst the user is temporarily inactive, so that in the event they move to a calculated setting, the image can be displayed instantly.
Example. The user is using shift and arrow keys to adjust exposure and has just set it to 0.8 EV. Ansel calculates the pipe and displays the result as currently. Ansel then proceeds to calculate the pipe at 1 EV and then 0.6 EV but does not change the image. If the user now presses shift+right arrow, i.e. 1EV, the image is already calculated and can be instantly displayed. It may be that either or both of 1 and 0.6 have already been calculated anyway, in which case no background calcs need doing when the user moves to 0.8. If the user does anything whilst Ansel is calculating adjacent steps, then the speculative calcs are abandoned so the user's latest change can be dealt with.
So the intended result is that as you press left and right to home in on the best exposure, Ansel responds quickly and you can judge the image easily.
This could perhaps be applied to all sliders.
All reactions