- Allow configuring
only_rerunregular expressions inpytest.inifiles. (#165) - Show each rerun attempt and its final outcome in the rerun test summary info section. (#191)
- Allow flaky marker conditions to inspect the exception that caused a failed test phase, including when running with pytest-xdist. (#230)
- Match
only_rerunagainst the full exception chain (__cause__and__context__), not only the outermost exception. Matchrerun_exceptagainst explicit__cause__links only, so implicitexcept/finallycontext does not suppress reruns. (#353) - Fix
INTERNALERRORwhenonly_rerunorrerun_exceptis given a bare exception class instead of a list. (#362) - Fix subtest reruns with newer pytest versions that use structured
NodeIdvalues internally. (#363) - Mark teardown failures from an attempt that is rerun as reruns, so a later successful attempt is not reported as an error. (#366)
- Keep the test suite passing when pytest-randomly is installed, including when
the outer pytest is started with
-p no:randomly. (#218) - Test the free-threaded Python 3.14 build in CI, via a new
py314ttox environment and a matching workflow job. (#361)
- Ensure teardown reports are passed to
pytest_runtest_logreportfor rerun attempts. (#237) - Prevent superseded built-in subtest failures from remaining in the final test result when rerunning tests with pytest-xdist. (#350)
- Restore module, class, and session scoped fixture teardown when a
flakymarker condition is falsy. (#351) - Restore module, class, and session scoped fixture teardown when an error raised during teardown rules out a re-run. (#356)
- Keep module, class, and session scoped fixtures alive across re-runs of a test whose call phase failed through subtests only. (#357)
- Authenticate xdist StatusDB connections with a per-session token. (#358)
- Ensure negative rerun counts do not skip the initial test execution. (#359)
- Replace deprecated
Config.getvalue()calls withConfig.getoption(). (#345)
- Add a repeatable
--rerun-exclude-pathoption to exclude test files or directories from reruns. (#232)
- Fix a regression in version 16.5 which made
--pdbunusable even when no reruns were configured. (#342)
- Add
--max-suite-rerunsoption to cap the total number of reruns across the entire test suite. Once the limit is reached, no further reruns occur regardless of per-test--rerunsor@pytest.mark.flakysettings. (#298)
- Create a new test class instance for each rerun. Previously the instance of
the failed attempt was reused, so state stored on
selfleaked into the rerun and broke test isolation. Fixtures cached at class scope or higher are still not re-executed. (#268) - Prevent a rerun when a fixture teardown raises an error matching
--rerun-except. Previously only the error from the current test stage was considered, so a--rerun-except-matching error raised during teardown was ignored and the test was rerun anyway. (#270)
- Drop support for pytest 8.1. Minimum pytest version is now 8.2.
- Add support for pytest 9.1.
- Rerun tests with failed subtests. This feature is only available on pytest 9.0 and later. The pytest-subtests plugin is not supported. Fixes #315.
- Add
--reruns-delay-backoff-factoroption (and the matchingreruns_delay_backoff_factormarker kwarg / ini setting) to grow the rerun delay after each attempt for an exponential backoff. The delay before the n-th re-run isreruns_delay * reruns_delay_backoff_factor ** (n - 1). The default factor is1.0, so existing behaviour (a constant delay) is unchanged.
- Add
--reruns-modeoption (strictorappend). Withappend, marker reruns and the global--reruns/rerunsini setting are summed instead of the marker taking strict priority. Default isstrictso existing behaviour is unchanged. Fixes #321. - Add
--rerun-show-tracebacksoption to display tracebacks from failed attempts that were retried, including tests that eventually passed. The rerun summary section is emitted automatically when the flag is set, so-rRis no longer required to see the tracebacks. Fixes #156.
- Drop support for pytest 8.0. Minimum pytest version is now 8.1.
- Add support for pytest 9.0.
- Fix missing teardown for session and module scoped fixtures when fixture teardown fails. Fixes #314.
- Clear fixture finalizers when removing cached results from failed fixtures
to fix compatibility with pytest >= 9, which asserts that
_finalizersis empty before executing a fixture. Fixes #323. - Accept exception classes (not only regex strings) in the
only_rerunandrerun_exceptmarker keyword arguments instead of crashing with an internal error. Fixes #275.
- Drop support for Python 3.9.
- Changed "localhost" to "127.0.0.1" to avoid bad hostname resolution.
- Added
--force-rerunsto override rerun count globally. Fixes #306.
- Reverted the ability to access error attributes because of an incompatibility with pytest-xdist. Fixes #302, #303.
- Drop support for pytest < 8.
- Add support for pytest 8.4.x.
- Add support for upcoming Python 3.14.
- Allow
@pytest.mark.flaky(condition)to accept a callable or a string to be evaluated. The evaluated string has access to the exception instance via theerrorobject. (#230)
- Fix
--fail-on-flakyoption to fail the test run with custom exit code only when reruns are detected. (#287) - Switched to using the SPDX license identifier in the project metadata.
- Change exception filtering logic to match
AssertionErrorraised viaassertstatements when filtering by "AssertionError". (#292)
- Drop support for Python 3.8.
- Drop support for pytest < 7.4.
- Fix compatibility with pytest 8.2. (#267)
- Add support for pytest 8.2, 8.3.
- Add
--fail-on-flakyoption to fail the test run with custom exit code when test passed on rerun.
- Fix missing teardown for non-function scoped fixtures when using only_rerun or rerun_except queries. (#234) and (#241)
- Drop support for Python 3.7.
- Drop support for pytest < 7.2.
- Add support for pytest 8.0, 8.1.
- Drop support for pytest < 7.0.
- Add support for Python 3.12.
- Fix crashitem names mismatch between client and server. (#172)
- Fix crash when setup fails with --rerun-except flag. (#230)
- Drop support for pytest < 6.2.
- Add
only_rerunandrerun_exceptarguments to@pytest.mark.flakymarker. - Add support for pytest 7.3, 7.4.
- Failures are now rerun only if they match at least one
--only-rerunpattern (if given) and none of the--rerun-exceptpatterns. Previously, using both--only-rerunand--rerun-excepttogether could cause failures to be rerun even if they did not match any--only-rerunpattern, and when using multiple--rerun-exceptpatterns, all failures would be rerun unless they matched every pattern. (#225)
- Execute teardown when test was skipped in setup phase of a fixture.
- Fix crash during teardown when runtest protocol hook is overwritten by another plugin.
- Fix crash during teardown when TestCase class is used as base class.
- Run teardown of session, class, ... scoped fixtures only once after rerunning tests
- Expose
rerunsandreruns_delaythroughpytest.inifile.
- Drop support for Python 3.6.
- Drop support for pytest < 6.
- Fix crash when pytest-xdist is installed but disabled. (Thanks to @mgorny for the PR.)
- Fix crash when xfail(strict=True) mark is used with --rerun-only flag.
- Added option
--rerun-exceptto rerun failed tests those are other than the mentioned Error. - Add support for Python 3.11.
- Add support for pytest 7.0, 7.1, 7.2.
- Allow recovery from crashed tests with pytest-xdist.
- Add support for Python 3.10 (as of Python 3.10.rc2). (Thanks to @hugovk for the PR.)
- Allows using a
stras condition for@pytest.mark.flaky(condition)which gets evaluated dynamically similarly to@pytest.mark.skipif(condition). (#162 provided by @15klli)
- Drop support for Python 3.5.
- Drop support for pytest < 5.3.
- Add
conditionkeyword argument to the re-run marker. (Thanks to @BeyondEvil for the PR.) - Add support for Python 3.9. (Thanks to @digitronik for the PR.)
- Add support for pytest 6.3. (Thanks to @bluetech for the PR.)
- Add compatibility with
pytest-xdist >= 2.0. (Thanks to @bluetech for the PR.)
- Check for the resultlog by feature and not by version as pytest master does not provide a consistent version.
- Ignore
--result-logcommand line option when used together withpytest >= 6.1.0, as it was removed there. This is a quick fix, use an older version of pytest, if you want to keep this feature for now. (Thanks to @ntessore for the PR) - Support up to pytest 6.1.0.
- Add a new flag
--only-rerunto allow for users to rerun only certain errors.
- Drop dependency on
mock. - Add support for pre-commit and add a linting tox target. (#117) (PR from @gnikonorov)
- Drop support for pytest version 4.4, 4.5 and 4.6.
- Drop support for Python 2.7.
- Add support for pytest 5.4.
- Add support for Python 3.8.
- Drop support for pytest version 3.10, 4.0, 4.1, 4.2 and 4.3
- Drop support for Python 3.4.
- Add support for pytest version 4.4, 4.5, 4.6, 5.0, 5.1 and 5.2.
- Explicitly depend on setuptools to ensure installation when working in environments without it. (#98) (PR from @Eric-Arellano)
- Drop support for pytest version 3.8 and 3.9.
- Add support for pytest version 4.2 and 4.3.
- Fixed #83 issue about ignored
pytest_runtest_logfinishhooks. (#83) (PR from @KillAChicken)
- Drop support for pytest version 3.6 and 3.7.
- Add support for pytest version 4.0 and 4.1.
- Fixed #77 regression issue introduced in 4.2 related to the
rerunattribute on the test report. (#77) (Thanks to @RibeiroAna for the PR).
- Drop support for pytest versions < 3.6 to reduce the maintenance burden.
- Add support up to pytest version 3.10. Thus supporting the newest 5 pytest releases.
- Add support for Python 3.7.
- Fix issue can occur when used together with
pytest-flake8(#73)
- Fixed #64 issue related to
setup_classandfixtureexecutions on rerun (Thanks to @OlegKuzovkov for the PR). - Added new
execution_countattribute to reflect the number of test case executions according to #67 issue. (Thanks to @OlegKuzovkov for the PR).
- Add support for pytest 3.6 by using
Node.get_closest_marker()(Thanks to @The-Compiler for the PR).
- Added option to add a delay time between test re-runs (Thanks to @Kanguros for the PR).
- Added support for pytest >= 3.3.
- Drop support for pytest < 2.8.7.
- Restored compatibility with pytest-xdist. (Thanks to @davehunt for the PR)
- Add support for Python 3.6.
- Add support for pytest 2.9 up to 3.2
- Drop support for Python 2.6 and 3.3.
- Drop support for pytest < 2.7.
- Ensure that other plugins can run after this one, in case of a global setting
--rerun=0. (Thanks to @sublee for the PR)
- Add default value of
reruns=1ifpytest.mark.flaky()is called without arguments. - Also offer a distribution as universal wheel. (Thanks to @tltx for the PR)
- Prepare CLI options to pytest 3.0, to avoid a deprecation warning.
- Fix error due to missing CHANGES.rst when creating the source distribution by adding a MANIFEST.in.
- Drop support for Python 3.2, since supporting it became too much of a hassle. (Reason: Virtualenv 14+ / PIP 8+ do not support Python 3.2 anymore.)
- Add support for
--resultlogoption by parsing reruns accordingly. (#28)
- Improve package description and include CHANGELOG into description.
- Rewrite to use newer API of pytest >= 2.3.0
- Improve support for pytest-xdist by only logging the final result. (Logging intermediate results will finish the test rather rerunning it.)