Repository navigation
Replies: 4 comments 1 reply
|
Hi @romhirsch, |
0 replies
|
@romhirsch Did you manage to find a solution to this issue? |
0 replies
|
@harinduravin Thanks for trying to help! Yes, I found this paper too and implemented the proposed solution and it works. |
1 reply
|
Could you provide me with the paper implementation you did? I couldn't do it myself |
0 replies
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Uh oh!
There was an error while loading. Please reload this page.
Uh oh!
There was an error while loading. Please reload this page.
Hello,
I have been implementing SC-FDE with LDPC coding over a TDL channel, but I am observing poor performance compared to OFDM. The uncoded SC-FDE results look fine, but when I add LDPC, the performance degrades significantly. I suspect the issue is related to how I handle the effective noise variance (no_eff) in SC-FDE.
My setup
Both OFDM and SC-FDE implementations are included.
For SC-FDE, I do not use the IFFT at the transmitter (unlike OFDM). Instead, I transmit the symbols directly over the discrete-time channel model.
At the receiver:
Perform OFDM demodulation (remove CP and FFT).
Apply frequency-domain equalization (same as OFDM).
Apply IFFT (to go back to time domain).
Pass the symbols to the demapper.
This differs from OFDM, where the demapper is directly after the equalizer in the frequency domain.
Problem
In OFDM, using no_eff in the demapper gives good results with LDPC.
In SC-FDE, using either no or no_eff leads to much worse performance with LDPC (even though uncoded SC-FDE works fine).
It seems the choice of noise variance input to the demapper is critical, and I may not be handling it correctly in the SC-FDE case.
Results (examples)
AWGN: QPSK, n=128, k=64 (uncoded uses 128 bits). (it looks ok)

TDL-C 100 ns (no Doppler): QPSK, n=128, k=64 (uncoded uses 128 bits). (The sc-fde with LDPC (orange) have very low preformence)

I would really appreciate guidance on the correct way to connect the equalizer and demapper in SC-FDE with LDPC.
Code:
All reactions